Quoted from cottonm4:

Ok guys, I have just traded emails with the guy who is making the Big Game bingo card light boards. As of today, he has only sold three sets. He is not worried about it but some of you who said you would buy a set ought to step up and make an order and give him an incentive to work up something for Nine Ball.

Quoted from barakandl:

Any interest in replacement three by three lamp boards for the Big Game playfield bingo cards? The originals are flaky are corroded in mine and I got frustrated messing with them so I whipped this up today.
The replacement use the wedge type twist in PCB sockets. I know no wedge based bulbs used in this game originally, but that was the easiest / cheapest way I could think of to do a lamp board.... no assembly / soldering of lamp sockets. Would need to use nylon stand offs and longer wood screws to mount the new pcb to the PF, but thats easy/cheap. There is a hole for every lamp and common side to solder wires directly. Also a .100" connector could be used.
Could apply the lamp board idea to other games like Nine Ball, Meteor, and even WMS games uses something similar.

Quoted from Dragon:

were these bolts on the lock bar installed to prevent prying off of the lock bar ?
[quoted image][quoted image]