Quoted from TomDK:Hahaha ... you do not know this guy.
He is making all his stuff for his ego and to earn money. So you have to enter his forums and over PM you will get a quote.
This is the way for all his stuff.
But I appreciate that he makes at least very good decals and stickers. Expect the Capcom PM apron which is a normal UV print , plotted out and glued over a chrome foil. For sure, better than nothing but totally overprized for a copy.
Some art reproductions are very difficult to do, but I am quite decisive and find effective solutions. Therefore, the challenge is not only in the restoration, which can be more or less difficult (it can also be more or less difficult to achieve, even for a massive collector like me), but also in how I am going to print it sacrificing the fewest number details that could be seen in the original.
I restore for the sake of restoring, for my own amusement, but sometimes for the challenge. The same thing happens when someone asks me for help to make a printout of something that has some complexity, like you TomDK. There is also a challenge there.
Everything can be done if you are willing to pay the price so that the person who has the knowledge and the resources does it on your behalf and runs the economic risks of making it look bad.
I do not work in a printing press and I do not have any special treatment in this regard so that things come out cheaper.
In your case, we are talking about "Pinball Magic Middle Apron" (CAPCOM), which presents a certain complexity. My ingenuity to provide a visually very similar result is beyond doubt and I made a tutorial so that anyone can follow my steps if they want to restore this piece themselves.
The result was great!
IMPORTANT: Use my links for a full quality photos and screenshots!!!
"Pinball Magic Centre Apron - AW00123-5" (CAPCOM) rev. 2 . printed in vinyl with gloss protective lamination, chrome details and precut (photo 3).
https://www.zonaarcade.com/fotos/artes/Pinball-Magic-Centre-Apron-print1.JPG
Pinball-Magic-Centre-Apron-print1 (resized).jpg
"Pinball Magic Centre Apron - AW00123-5" (CAPCOM) rev. 2 . printed in vinyl with gloss protective lamination, chrome details and precut (photo 4).
https://www.zonaarcade.com/fotos/artes/Pinball-Magic-Centre-Apron-print4.JPG
Pinball-Magic-Centre-Apron-print4 (resized).jpg
NOTE:Years after making these reproductions, I was able to apply a better solution so as not to have to manufacture the printing materials at home, with the risks of error that exist. Let's see it in this example:
https://www.zonaarcade.com/Fotos/Artes/Shinobi-3-Mega-Play-Cartridge-Stickers-print3.jpg
Shinobi-3-Mega-Play-Cartridge-Stickers-print3 (resized).jpg
If the occasion arises, I'll tell you how I did it.
In the case of "Big Bang Bar Pinball Aprons", I already anticipate that I have found a solution for its printed reproduction!
Cheers!