(Topic ID: 122204)

Best way to palletize a pin?

By DK

9 years ago



Topic Stats

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    View topic image gallery

    002.JPG
    #1 9 years ago

    How do you do it? Provide pics. Thanks

    #2 9 years ago

    Blanket wrap, shrink wrap, and two straps.

    002.JPG002.JPG
    #3 9 years ago

    I dint have pics, but here is how I have had great success in past with:

    1) Find a good strong pallet from like a Home Depot / Lowe's (free)
    2) In home depot they sell strapping/banding kits
    3) Legs/bolts off and sit game centered, flat on pallet with cardboard under game but on top of pallet
    4) Put balls, keys and leg bolts in baggie's and put in coin box and blue tape down or put lid back on
    5) Get some thick foam (5" approx) and excess cardboard
    6) A thinner foam for between head and cabinet when laid down
    7) Lay thick foam over all exterior of game and cover with cut to size cardboard and tape in place, then strap the banding around game and secure to pallet, snug it carefully and don't just crank it down but snug enough for game not to slide around on pallet.
    8) Mark the cardboard boldly on all sides "Fragile" - "Do not Stack"

    Not super detailed but you get the gist of how this should be done.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


    This page was printed from https://pinside.com/pinball/forum/topic/best-way-to-palletize-a-pin and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.