The Walking Dead (Pro)
Stern, 2014You're currently viewing posts by Pinsider ryanstl.
Click here to go back to viewing the entire thread.
Quoted from LTG:I'd skip the naptha ( lighter fluid ) and go with Novus 1 first.
Then a good hard carnauba wax like this : One or two coats.
https://www.jbtools.com/meguiars-m2611-hi-tech-yellow-wax-paste/?gclid=Cj0KCQjwmcWDBhCOARIsALgJ2Qco712z38YjtxzjOBP-ABDYyotFMtQ1nCeDPNPY-sgOSnJjC9HupNYaAvTtEALw_wcB
You can find it at auto parts stores.
LTG : )
I agree. Novus 1 is probably the only cleaner you need then Carnuba wax. Nocus 2 and 3 start getting abrasive.
Quoted from vid1900:Everything sucks now.
Ronsonol - changed their formula
Simple Green - changed to weaker formula
Bix - is now the worst paint stripper, you used to scrape it all up and put it back in the can for reuse.
Maker's Mark - watered down their whiskey (although after much outcry, have restored it to 90 proof) [quoted image]
You left out Lava Lamp.
jvivlemore don't try flame polish on a nice ramp like that before practicing on junk ramps. You'll likely ruin it. I have used Nova 3, then 2, then 1 on the plastics with good results, but never really worried about bringing back to factory finish.
You're currently viewing posts by Pinsider ryanstl.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/before-i-do-my-1st-cleaning-are-my-steps-amp-supplies-correct?tu=ryanstl and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Fenton, MO