Baywatch
Sega, 1995You're currently viewing posts by Pinsider mab487.
Click here to go back to viewing the entire thread.
The issue I am having is with the right flipper switch. Both of the right flippers work great, the problem is the switch does not register. So for example, in the test menu you cannot navigate with the right flipper, in video mode the right button doesn't work, and in switch test the right flipper does not register as closed when pressed.
I have swapped the flipper boards with no change in the problem. And all other switches in the same row and column work and register fine.
Any ideas? Thanks!
Quoted from zacaj:Check continuity for the switch wire going from the flipper board to the MPU
Checked that and there is continuity.
You're currently viewing posts by Pinsider mab487.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/baywatch-weird-switch-issue-help-needed?tu=mab487 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chattanooga, TN