Can anyone tell me what voltages by pins(most important for the DMD) must come out from the connectors of the transformer
I bought this machine,but the transformer is missing.Everything looks good-all plastics,good playfiled,the large display and all boards.
If I know the voltages I will try to make one transformer

Regards

OK.Time for restore BW.As I can said before so I will need to fins some way to power on this machine.
I have transformers from these machine:
SEGA-A13
Data East-Checkpoing,Adventures or Rocky
WPC-WCS94,No Fear,Roadshow,Popeye
System11-Bally/Williams

Which of this is most similiar with this of BW.I just want to try to start the machine without the display and to see if everythings is working,after that I will try to make and separate power for the display

Other question:If there have no power for the display,if the machine will boot normaly?

Hmm I compared these two:
-Adventures of Rocky
-Baywatch

The only different is the pins for the DMD.I must cut pins 1,2.8 of Adventures of Rocky(because they are 90v and 100v) and Baywatch need +18v on pins 1,2 for display power,pin8 is not in use.
As I can see all other pins are with correct colors and voltages.
Can anyone confirm this?

Hmmm looks like +18v that are for the Display go to separate connector from CN1 on Power board.Is that right?

Everything is alright,but the display is out