Can anyone tell me what voltages by pins(most important for the DMD) must come out from the connectors of the transformer
I bought this machine,but the transformer is missing.Everything looks good-all plastics,good playfiled,the large display and all boards.
If I know the voltages I will try to make one transformer
Regards
OK.Time for restore BW.As I can said before so I will need to fins some way to power on this machine.
I have transformers from these machine:
SEGA-A13
Data East-Checkpoing,Adventures or Rocky
WPC-WCS94,No Fear,Roadshow,Popeye
System11-Bally/Williams
Which of this is most similiar with this of BW.I just want to try to start the machine without the display and to see if everythings is working,after that I will try to make and separate power for the display
Other question:If there have no power for the display,if the machine will boot normaly?
Hmm I compared these two:
-Adventures of Rocky
-Baywatch
The only different is the pins for the DMD.I must cut pins 1,2.8 of Adventures of Rocky(because they are 90v and 100v) and Baywatch need +18v on pins 1,2 for display power,pin8 is not in use.
As I can see all other pins are with correct colors and voltages.
Can anyone confirm this?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/baywatch-transformer and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Varna
Anderson, SC