Quoted from ThatOneDude:...
I need to find someone to burn a ROM for me.
...
(Topic ID: 33977)
You're currently viewing posts by Pinsider kuroda.
Click here to go back to viewing the entire thread.
2 weeks later
Quoted from VladM:...The lower right flipper is not very strong when in "holding" position. It will pulsate when pressed down by hand, or if a strong ball hits it. Replaced the coil, sleeve, EOS switch. Adjusted correctly.
...
Vlad
Check correct connection of coil and EOS. Something might have been misconnected by previous owner.
Check wether problem moves from right to left flipper when exchanging front flipper board with rear one and vice versa.
The one board controls both flippers on left hand side, the other board the ones on the right hand side of the machine.
Flipper board are located at left inner vertical wall of cabinet.
1 week later
Quoted from newovad:Joined the club. Looks like a ground connection. We does everyone else have it connected? Thanks.[quoted image]
Pls post photo showing larger area to be able to identify location of cable. Thanks.
Quoted from newovad:Top of the playfield.[quoted image]
On my Baywatch this cable hooks up to the left screw of the metal bracket of playfield's backside wall:
IMG_20200226_150834 (resized).jpgIMG_20200226_150851 (resized).jpg 1 month later
Quoted from TopMoose:...
I noticed today that the two flash lamps mounted in the cabinet under the backbox and above the pop bumpers aren't working. Is there an easy way to access those bulbs? The opening inside the backbox is too narrow to see anything, the lamp covers are riveted on from the back and the front of the piece appears to be stapled to the inside of the cabinet.
How does one change those bulbs?
I removed the staples and replaced them with black screws. This mod is not visible during play but only when player lowers head almost all the way down to glas above the playfield, but gives easy access to flashers in case of necessary service.
IMG_20200404_124558[1] (resized).jpg 4 weeks later
Quoted from dearliza98:Hey all. I just picked up a semi-working Baywatch. Pretty excited b/c this game was on my wishlist for a few years. Wondering... would anyone happen to have an "extra ball" button they would consider selling me? This is the rectangle button underneath the start button. Or if you have a link to a retailer that has one, that would be great. I've been searching the internet for quite some time and coming up empty. The plastic tabs on my button are broken off so it won't engage the switch. Thank you!
Found mine on eBay, was shipped from China. Works perfect.
Use e.g. "button arcade rectangle" for search on ebay.
Promoted items from Pinside Marketplace and Pinside Shops!
Anderson, SC
You're currently viewing posts by Pinsider kuroda.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
