Collingwood, ON
I picked one up last weekend great game
(Topic ID: 33977)
You're currently viewing posts by Pinsider Williampinball.
Click here to go back to viewing the entire thread.
Quoted from Rocketrob:it really is a great game i have to work out the skill shot issues becuse the ball get caught up near the pop bumer lanes
Hope u do get it working right it's a fast great playing game
1 month later
6 months later
Quoted from allsportdvd:Every time I hit the left flipper the slingshots fire, does anyone have a solution as to why this may happen?
Yes the slingshots gap is too close
5 months later
Quoted from Midway-Man:Anyone of the owner can show me how the right ramp is properly assembled.
My ball frequently gets stuck on the yellow marked place in the picture. [quoted image]
It's just a clear plastic there with the 3 screws holding it that's all that's there ,ball shouldn't get stuck there
Quoted from Midway-Man:I removed the bottom screw. But it’s still getting stuck… Weird, so there aren’t any spacers? Just some washers?
Maybe the ramp has deformed itself over the past years. I will 3D print some small spacers, this will help.
Thanks guys.
No spacers just the plastic and the 3 screws holding it and that's all is there ,don't know why the ball gets stuck there ,so the ball gets stuck on top of the plastic ?
9 months later
The wires just hang down not behide that like it was ,remember when the head goes up and down they have too move with it
Quoted from Bagdad:Yeah that's what I thought. So the orange wire that connect the flashers (shown on my picture), it's not supposed to be in that "Tube" right? Does it hang down directly from the backbox center hole into the panel with the flashers?
I will check in my game let u know
Quoted from Bagdad:Yeah that's what I thought. So the orange wire that connect the flashers (shown on my picture), it's not supposed to be in that "Tube" right? Does it hang down directly from the backbox center hole into the panel with the flashers?
I can't pull out my Baywatch too have a good look right now it's blocked in with others I am working on but from the coin door it looks like the two black wire feeds one is on one side and the other on the other side ,and I can see just a bit of the wires going too the flashers on the left side ,I don't think any wires run though the middle cutout ,shouldn't be hope this helps
Quoted from Bagdad:Thanks for taking the time to look. I'll repair my panel and see if I can get the orange wire to feed from the left.
Anytime bud
2 months later
1 month later
Quoted from jk:Just joined the club! Can someone post a pic of the ball launcher switch wiring? I don’t see a diode on mine and one wire is off. Thanks!
[quoted image][quoted image][quoted image]
Welcome too the club great game
Quoted from SirMachismo:It’s not pretty, but the pinballspareparts site still shows the speaker panel in stock. I have never purchased anything from them, but I think this might be the guy northerndude was talking about.
I hope you bring her back to life.
https://www.pinballspareparts.com.au/parts-by-machine/sega-parts/baywatch/sega-baywatch-speaker-panel-used-and-abused.html
I got a few things from them and are good
Quoted from jk:Can anyone confirm if ribbon cable location CN21 on CPU should have a male header pin missing at pin 19?
Noticed it when I was putting the CPU board back in the game.
[quoted image][quoted image]
Yes that pin is missing
3 weeks later
Quoted from mikespins:I am, that is one of the things I am "cleaning up" on the design.
Great job looking good
Quoted from pghpinfan:Thanks ! Looks great! I may try with playfield on.
Way easyier with the PF out of the game
1 month later
Quoted from mikespins:My recently purchased Baywatch was missing a flasher & mount on the main wire ramp, so I replicated the design for everyone who 3D prints.
[quoted image][quoted image][quoted image]
Here is the free STL - https://www.thingiverse.com/thing:5427184
The machine was also missing the left railing on the lifeguard tower hut, so I designed that as well and am offering that for free here - https://www.thingiverse.com/thing:5427178
[quoted image][quoted image]
Very nice job looks great
Quoted from Clytor:Didn’t the Hoff sell his personal and HUO Baywatch, not that long ago?
That was a few years ago not sure
Quoted from mannymasy:which of the two is correct?
[quoted image]
Top one I beleave
Quoted from northvibe:Thank you!
Pending sold!
Sad I didn't get them into my baywatch but glad someone else can protect theirs
That was fast if it falls though let me know
2 months later
Quoted from nighttaco:So I was thinking of putting a color dmd in my Baywatch, cheapest I can find is like $550, is this the going rate now? Seems spendy...
Yes the big ones are not cheap anymore
I remember a few years ago they are 475 or something like that and back then I thought wow that's not cheap lol things keep going up
Quoted from RyanStl:Wait, you paid how much for the game? Problem for you is not the cost of the ColorDMD, but that you got a smokin' deal on a BW.
Yes back in the day games was only 1k or so lol not any more these days are far gone now
Promoted items from Pinside Marketplace and Pinside Shops!
Anderson, SC
You're currently viewing posts by Pinsider Williampinball.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
