Quoted from pghpinfan:The card says 4 player doubles though?[quoted image]
Try hitting for four players, it may team them up..
(Topic ID: 33977)
Quoted from RyanStl:That's a deal. Plus, you can get it right away. It took me about 6 weeks to get mine straight from Cliff.
It’s a must have IMO. Cleaned up my shark hole that was showing signs of wear from play
Monroe, NY
Quoted from northerndude:You doing original artwork or is there an alternate one made? I saw retro had them a looong time ago i think
I'm going with original artwork from retro refurb. I used their cabinet decals for my TSPP and am very happy with the quality.
Brighton
Quoted from mikespins:I'm going with original artwork from retro refurb. I used their cabinet decals for my TSPP and am very happy with the quality.
Do you have the retro refurb decals to hand ?
I only ask because their service has been very poor of late - pinheads over here complaining of unfulfilled orders, long delays with no response to enquiries etc
Quoted from Ive:Do you have the retro refurb decals to hand ?
I only ask because their service has been very poor of late - pinheads over here complaining of unfulfilled orders, long delays with no response to enquiries etc
Yes I do. I've placed probably a half a dozen orders with them and have never had an issue.
Quoted from tfduda:Had a wooden closet pole that was the right length to keep the playfield propped up. Seemed stable enough. Thanks much for the recommendation!
nice! glad that worked.
1 week later
Finished the cabinet restoration on my Baywatch! Installed Retro Refurb decals after fully stripping, priming, painting, etc. Resto thread here https://pinside.com/pinball/forum/topic/immaculate-baywatch-restoration
Does anyone know where I can get a stencil for the back?
20220801_223414.jpg20220801_223427.jpg20220801_223437.jpg20220801_223553.jpg20220801_223605.jpg20220801_223618.jpg20220801_223657.jpg20220801_223707.jpg20220801_223909.jpg20220801_223934.jpgQuoted from mikespins:Finished the cabinet restoration on my Baywatch! Installed Retro Refurb decals after fully stripping, priming, painting, etc. Resto thread here https://pinside.com/pinball/forum/topic/immaculate-baywatch-restoration
Does anyone know where I can get a stencil for the back?
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
She looks glorious, amazing work! The red powder coat is perfection.
Quoted from mikespins:Finished the cabinet restoration on my Baywatch! Installed Retro Refurb decals after fully stripping, priming, painting, etc. Resto thread here https://pinside.com/pinball/forum/topic/immaculate-baywatch-restoration
Does anyone know where I can get a stencil for the back?
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Congratulations, looks great!
Does anybody else have trouble where the ball gets stuck inbetween the shooter VUK and the shooter lane wireform? I cannot seem to adjust those two to not fall perfectly inbetween those two pieces. Thinking of trying to 3D print something to make that area rounded rather than two metal pieces with a gap inbetween.
Quoted from mikespins:Finished the cabinet restoration on my Baywatch! Installed Retro Refurb decals after fully stripping, priming, painting, etc. Resto thread here https://pinside.com/pinball/forum/topic/immaculate-baywatch-restoration
Does anyone know where I can get a stencil for the back?
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Amazing job sir. You now have one of the nicest Baywatch machines around!
Can someone post or send me a picture of the wiring for the Knocker located on the inside of the cabinet? The knocker is located next to the base speaker. Thanks.
Quoted from unlockpinball:Can someone post or send me a picture of the wiring for the Knocker located on the inside of the cabinet? The knocker is located next to the base speaker. Thanks.
Sorry for the crappy pics. Brown wiring on the left and purple with blue dashes wiring on the right.
09E4AB72-1FFF-403C-9AA1-16A5370C88B4 (resized).jpeg14DD0319-4D6D-448D-937D-55561919FEF2 (resized).jpegA2663CB3-8E1F-4AD5-8FE9-A067FFF0E276 (resized).jpegA4846D22-EA98-48A4-8E4F-8A075C68A14B (resized).jpegI added an external sub to my Baywatch, there is some bass on this pin. I am not sure how well it translates after recording it on an iPhone and uploading it to YouTube, but here it is.
Málaga
2 weeks later
Quoted from Bakerman:Used SOS many times. Items always arrive, but can be a little slow.
It's been a long time and I haven't received my purchase... I have sent him 3 emails but no response. Does anyone have contact with the owners of that page? and some other place where I can buy that plastic for the second time?. Thank you
Quoted from mannymasy:It's been a long time and I haven't received my purchase... I have sent him 3 emails but no response. Does anyone have contact with the owners of that page? and some other place where I can buy that plastic for the second time?. Thank you
That sucks man. Hope you get the part.
Quoted from mannymasy:I don't know, what is it?
See this post:
https://pinside.com/pinball/forum/topic/baywatch-clubmembers-only/page/89#post-6949377
I purchased from him and he has my highest recommendation!
Quoted from mannymasy:But are they used or new?
They are used. He will send you good photos of the actual parts and then you can decide whether to purchase them or not.
Winnipeg, MB
Hello, I’m having an issue with my Baywatch project. The game boots and plays only with the coin door open, solenoids work. When i close the door the game locks up. If I try booting the game with the coin door closed the game says “Baywatch will be right back” and the DMD shows the display version then goes black.
It’s when the bottom white memory protect switch by the coin door that’s causing issues when pressed in. I tried a different switch from a working game and same issue. Probably an issue on the CPU. CN14 is the connector on the cpu. I have continuity from the switch to the connector. New ramtron nv ram is installed. Any guidance on what else to check would be appreciated . How do I test the memory protect circuit?
B350D1FD-94A4-43FA-82BE-64EE21E671D9 (resized).jpegC0F7785D-B632-400C-B125-E2ED2B718E79 (resized).jpeg
D7B09C50-7EB0-46C0-A167-552BA5F26389 (resized).jpegQuoted from jk:Hello, I’m having an issue with my Baywatch project. The game boots and plays only with the coin door open, solenoids work. When i close the door the game locks up. If I try booting the game with the coin door closed the game says “Baywatch will be right back” and the DMD shows the display version then goes black.
It’s when the bottom white memory protect switch by the coin door that’s causing issues when pressed in. I tried a different switch from a working game and same issue. Probably an issue on the CPU. CN14 is the connector on the cpu. I have continuity from the switch to the connector. New ramtron nv ram is installed. Any guidance on what else to check would be appreciated . How do I test the memory protect circuit?
[quoted image][quoted image]
[quoted image]
Update:
It looks like it was a faulty 1608 Ramtron NVRAM. I tried another one and all problems seem to have gone away.
Here's an interesting one. I find that the display CPU reboots regularly on a few occasions. One is if I chimp flip the flippers immediately as the ball is coming out of the ball trough lockout area. Another is when I complete the running video mode.
I have repined and reflowed solder on the 5v logic connector and the 5V seems like it's been doubled up on the power supply connectors already.
Not crucial to gameplay. But it's odd...
Quoted from mikespins:Finished the cabinet restoration on my Baywatch! Installed Retro Refurb decals after fully stripping, priming, painting, etc. Resto thread here https://pinside.com/pinball/forum/topic/immaculate-baywatch-restoration
Does anyone know where I can get a stencil for the back?
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
This is beautiful man. What Side armour is that? I need some with the protectors around the flipper buttons that will fit a Baywatch. Would this fit? https://www.pinball.center/en/shop/pinball-parts/cabinet-parts/side-rails/7242/side-rails-for-data-east-1-pair-535-5010-3x
Quoted from Huggers:This is beautiful man. What Side armour is that? I need some with the protectors around the flipper buttons that will fit a Baywatch. Would this fit? https://www.pinball.center/en/shop/pinball-parts/cabinet-parts/side-rails/7242/side-rails-for-data-east-1-pair-535-5010-3x
Thanks! I used these https://www.pinballlife.com/black-button-guard-side-rails-for-data-east.html
I needed to drill new holes but it's very easy and worth it.
Replaced what I assume were the original flipper bats. From the looks and cracks on the originals…it was overdue. Now for some play testing for the rest of the night, you know to be sure they are properly installed. 
97872E47-94DA-41BB-B4AD-4494846B9CCA (resized).jpeg324E3253-DA50-4AE5-A3B0-120B779C1666 (resized).jpegCA7F5063-7DF3-40A7-B864-BB5FF82B3397 (resized).jpegD804F17D-1A16-465F-99B3-A3ED0E2D0B19 (resized).jpegQuoted from SirMachismo:Replaced what I assume were the original flipper bats. From the looks and cracks on the originals…it was overdue. Now for some play testing for the rest of the night, you know to be sure they are properly installed. [quoted image][quoted image][quoted image][quoted image]
Love the sonic logo, but I'm thinking about getting some precision flipper bats.
Quoted from RyanStl:Love the sonic logo, but I'm thinking about getting some precision flipper bats.
I would love to hear what you think of the precision flippers. I had the Sonic bats in my pinball tool box, otherwise I may have pulled the trigger on those.
Quoted from RyanStl:Love the sonic logo, but I'm thinking about getting some precision flipper bats.
I bought a set to try out in mine. Hoping to start putting the machine back together this week.
Quoted from BozoTheClown:I bought a set to try out in mine. Hoping to start putting the machine back together this week.
Cool, they would definitely be an alcohol influenced purchase if I get them. Totally something I see myself doing late at night.
2 weeks later
Hey fellow baywatch members! long story short, I need the plasma dmd extension harness for the original plasma dmd. I had one and lent it out and mt buddy sold my harness in the game... lol
It's my friend so I really don't care, but I need a replacement, If you moved to a color display this harness is no longer used. Please help! I have a party I'm hosting in 2 weeks for my daughter and need this working again.
I'm looking for the 4 pin extension harness that runs from the back box to the display, red, blue, black and black with red stripe... This is not the 5 volt 2 pin harness where the update / bulletin was issued this is the short extension harness that supples the 24 volt to the dmd
I'd be happy to compensate you for it if you no longer need it.
Thanks in advance
Mike
**FOUND** what I needed, Thanks Greg!
Quoted from gatordad:Hey fellow baywatch members! long story short, I need the plasma dmd extension harness for the original plasma dmd. I had one and lent it out and mt buddy sold my harness in the game... lol
It's my friend so I really don't care, but I need a replacement, If you moved to a color display this harness is no longer used. Please help! I have a party I'm hosting in 2 weeks for my daughter and need this working again.
I'm looking for the 4 pin extension harness that runs from the back box to the display, red, blue, black and black with red stripe... This is not the 5 volt 2 pin harness where the update / bulletin was issued this is the short extension harness that supples the 24 volt to the dmd
I'd be happy to compensate you for it if you no longer need it.
Thanks in advance
Mike
PXL_20220921_122147113 (resized).jpgPromoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
