(Topic ID: 135249)

Batman Forever Flashers issue


By PinballT

4 years ago



Topic Stats

  • 6 posts
  • 3 Pinsiders participating
  • Latest reply 4 years ago by PinballT
  • Topic is favorited by 1 Pinsider

You

Linked Games

You're currently viewing posts by Pinsider PinballT.
Click here to go back to viewing the entire thread.

#1 4 years ago

I am having trouble with two sets of my flashers on Batman Forever. I narrowed it down to two sets of wires. One is Black w/ green and the other is Black w/ Orange. The 89's are blowing every time I put a new bulb in. I know they are getting too much voltage but cannot figure out why. They are not touching anywhere that I can see and the PPB board checks out OK I think. I tested the transistors and they seem to test ok. The wires are ran to J7 on the PPB Board. I think they are pin #4 and pin #6. Any advice would be good. I am thinking something with the board but think other would blow too. ???? Thanks Tom

#2 4 years ago

Bump for any advice.

#4 4 years ago

There are two sets of about 4 on each set. I have just ran it through the flasher test and they blow when it is there turn to flash. I have not really measured the voltage coming off because I don't get a steady voltage. It just spikes when it is time for it to flash. I was thinking it could be a bad socket it but thought it would be odd for two sets to be bad. That might be my next option. I will take all bulbs out in each row and see then. Then I guess I will try disconnecting all except first one and go from there. I cannot think of another way. I was just thinking that I was missing something on the PPB board.

#6 4 years ago

Thanks Rob! I am always confused on measuring voltage. I never know what spot to put the meter on. There are so many different dials.

Promoted items from the Pinside Marketplace
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
3,200
Machine - For Sale
Brookfield, WI
€ 339.00
Displays
GermanGamingSupplies.com
From: $ 40.00
Lighting - Interactive
Professor Pinball
$ 48.00
Cabinet - Other
ModFather Pinball Mods
From: $ 9.99

You're currently viewing posts by Pinsider PinballT.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside