Through round about means, I came into possession of one of Pantherpinball's re-printed DE Batman playfields. I had it cleared with Omni 262 clear coat. It took almost 15 oz of clear to get a good coat on it. I then let it sit for a couple of days, and wet sanded with 1500/2500/3000 grit paper, and followed it up with a good polishing. The results are pretty nice!
My only mistake was not looking for registration errors around the middle of the playfield. I have one by the main ramp entrance I could have easily fixed, but I didn't catch it.
de batman clearned (resized).jpeg