Batman 66 (LE)
Stern, 2016
Batman 66 (Premium)
Stern, 2016
Batman 66 (Super LE)
Stern, 2016You're currently viewing posts by Pinsider waxx.
Click here to go back to viewing the entire thread.
Ok, I've been searching with no luck but I'm a new owner and the left loop switch seems to be in from the rail enough where not all shots trigger the switch. The switch is working fine but it doesn't seem like there is even a way to adjust it to improve the shot. Is there something I'm missing?
Quoted from Sutol:I'm sure I unscrewed the switch and reset it. Also make sure it is not catching on anything underneath too.
If it still doesnt register then remove it and bend the wire.
Lift the playfield get a ball and roll it round there and adjust as necessary. I had similar issues a good while back and I bent the wire I recall. Had no issues since.
Hope that helps.
Sorry, hard to describe but I've added some photos. I am trying to make sure this is how it was designed and it appears yes. My switch works perfect but the way the switch sits in the lane the ball can miss the switch entirely it seems.
1st photo is a PF and 2nd is my game. Everything seems to line up.
Batman 66 Playfield #BA44 (3) (resized).jpgthumbnail_IMG_6970 (2) (resized).jpgQuoted from Sutol:Looks the same as mine.
Put it in switch test mode and manually run a ball round there.You'll probably find it doesn't register the switch completely when it hugs that side rail.
A bit of tweaking on that switch/wire and you'll get it working 100%.
You looked underneath yet?
Yeah, I've been studying it and it looks right but top and bottom but doesn't seem to always register. I think you are right and I will probably continue trying to bend the switch to see if I can get it aligned better. I was just curious if anyone else has experienced this as it seems like it was oddly designed. I can't immediately find the flaw or solution which is rare after owning many pins over the last decade.
Quoted from Sutol:Looks the same as mine.
Put it in switch test mode and manually run a ball round there.You'll probably find it doesn't register the switch completely when it hugs that side rail.
A bit of tweaking on that switch/wire and you'll get it working 100%.
You looked underneath yet?
I think I got it nailed. I wasn’t sure it would work but moved the switch as far left as possible. Then bent the rail guide a Little but out there. That seems to have done it.
Quoted from jfh:Catwoman Edition is actually considered an LE, hence the same rules.
They called it a Signature Edition but same difference. I don’t like the weird/bad Photoshop on the Catwoman translite though.
You're currently viewing posts by Pinsider waxx.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/batman-66-official-club-thread?tu=waxx and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Grand Rapids, MI