Batman 66 (LE)
Stern, 2016
Batman 66 (Premium)
Stern, 2016
Batman 66 (Super LE)
Stern, 2016You're currently viewing posts by Pinsider swinks.
Click here to go back to viewing the entire thread.
Finally joined the club with full payment to our distributor done, pickup next Monday. I was down on a Deadpool but while away I played a Deadpool and Batman 66 and the Batman was more fun and much more nostalgic.
I want to upgrade the balls for the game and replace the stern ones, how many do I need?
Any other recommended must haves that I must order now initial before I slowly sweep 225 pages of the club thread.
Quoted from Macca101010:Welcome to the club You're gonna love your new game. So many must haves......
Recommend you not look at The Mod Couple Mods because they are all awesome, especially the Atomic Pile, Bat Signal and Speaker Illumination Mod kit and you will fall even more in love with this game.....Enjoy.
[quoted image]
thanks
how many balls do I need - 6?
and yes did a search on mods and there are quite a few good ones and there are some that I would like to do as well in time - look forward to playin
Quoted from jsa:I'd add to check the service bulletins and make sure you've got them all installed. Some prevent damage.
much appreciated
just remembered I went to a (Lost in the 50's) car collector's 2nd last open house before selling off everything as insurance was getting insane and he had actual movie prop cars from Back to the Future and Batman 1966 series
Batmobile 1966
IMG_4708 (resized).JPG
IMG_4682 (resized).JPG
IMG_4678 (resized).JPG
IMG_4704 (resized).JPG
Deloran
IMG_4684 (resized).JPG
IMG_4688 (resized).JPG
IMG_4690 (resized).JPG
IMG_4691 (resized).JPGpicked up a NIB Premium today and was happy and then sad....
A few dial in and correct items (non straight tournament button and plunger assembly) plus a few items that can't be fixed but feel it not acceptable for $12.5k AUD spend.
- the screen printing and clear is bubbling along the apron line on both sides of the apron about 2inches / 50mm on both sides - plus other bulges around posts - is this a new thing? - heard Tommy had it on a Iron Maiden
- a bit of a decal ripple on the side of the cabinet below the flipper about an inch in diameter
- and the ball guide up near the top in-lanes has a blank hole is this supposed to be secured - not a huge drama but not happy with the other 2 items.
is there a screw or nail missing in the ball guide?
IMG_0557 (resized).JPG
bubbling of the cab decal
P1170708 (resized).JPG
my main concern is the bubbling that you can push down and it moves on both sides of the drain each over 2inch / 5cm long - either side of bolt down point. Also s ome bulging around a few posts so my concern is when I would remove the apron or change a post that art and clear peel away.
IMG_0553 (resized).jpgIMG_0554 (resized).jpg
Quoted from TomN:The side art issue I can see clearly, but the PF issue is difficult for me to make out...Is that a bubble as well or light reflecting?
It is a hard one but at first I thought an excess of clear but a thin long bubble that moves when you push it down
You're currently viewing posts by Pinsider swinks.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/batman-66-official-club-thread?tu=swinks and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Houston, TX