who makes a nice gameplay video?
You're currently viewing posts by Pinsider pascal-pinball.
Click here to go back to viewing the entire thread.
Quoted from PinMonk:Only 50SLEs in the US is pretty rare, but those other 30SLEs scattered across the world is even more rare on a per country basis. I wish we knew where the 30 SLEs went that were shipped overseas.
My friend in Belgium has one (still NIB)
I bought a BM 66 LE...a few questions...
after a succesfull update my game did a nodeboard update but I got a update failed message. Is that a problem? The game plays good.
the spring from the shooter is to soft. I can't make it to the rollover lanes. Replace it?
Is that adam west signature real?
I just installed my LE topper.
But he doesn't work.
I am pretty sure I connected all the wires the right way.
before I installed the topper, there where already 2 connectors plugged into the left board an only 1 in the right board.
is that correct? on the images on the intructions, I see 2 connectors already installed in both boards.
also the batsignal, the 2 small lights and a few leds from the beacon went on, but after a power cycle the went back off.
any ideas?
I checked all the connectors. they are all right.
I also unplugged and replugged the connectors from the other board on the left and now I have a few light.
Bad connection? Bad board?
Thanks for the info.
How does the node noard test works in the menu? Is that usefull to see if my nodeboard is bad?
can somebody with a batman LE go to the node board test?
do you see the topper nodeboard in the test?
I don't have that.
thx
Quoted from MapleSyrup:I’m personally leaving Villain stacking OFF
I tried it with Villain stacking on, and it was one big chaos. You also can't understand the modes.
It's way more fun without the stacking.
You can still stack a main villain with a minor villain and that parachute mode and the main multiball.
That's 4 screens running at the same time
Thanks Lyman Sheats that we can "zap" betweet the screens!!!
Quoted from PinMonk:Yes. It's slightly different than the original BTDK.
but there are no BM66 protectors on his site...
Don't stack the major villains. Let that settong off.
your game will be total chaos.
you can stack a main villain with a minor villain with multiball with batturn...
If you change the setting "stack main villains" to on... this will happen: you start a main villain and after a few shots anther will be lit and so on. In no time you will be playing all four main villains at once and this will be total chaos.
you can't see what you're doing.
It's just perfect with this setting off (=facrory setting)
Can someone check this?...
During a mode, there's a timer in a circle above your score.
On my game, that circle with the time is flickering. It looks weird.
Has other BM66 owners this also (new software)
Quoted from Sethman:I was just going to mention this....it's new. I think just added yesterday with .85
I actually like it! Makes it far more noticeable
It looks like a bug
Quoted from marksf123:I was playing Shame multiball where I drained one ball at the same time I hit the mystery scope and was awarded an add a ball.
Yes, mystery during multiball = add a ball.
Another great thing in the software: When you start a main villain, begin with the combo: penguin scoop -> left loop (orange arrows) then all these main villain shots will be 2x !!!
Quoted from docquest:My joker standup target is getting hung up on the bracket again. Was there a consensus on best way to permanently fix this issue?
Is this your solution? --> https://pinside.com/pinball/forum/topic/batman-66-official-club-thread/page/135#post-4085344
Quoted from rotordave:Core mode kit question:
When you guys got your repair kits from Stern, did you get 2x capacitor plugs, or one?
They sent me 2 ... I needed kits for BM66 and also ASpro.
But reading the instructions, it infers that you need to fit a capacitor to both Node 8 AND Node 9 ... in which case, they haven’t sent me enough kits.
Did you guys fit 1x or 2x?
rd
can anyone give me the part number of those capacitor kits?
thx
Quoted from DavidPinballWizz:Do I understand it correct: In the minor villain choice screen, is king tut now available two times (once in season 1 and once in season 3?)
Love the addition of batusi multiball, so funny to watch the batusi moves, curious to know how it looks in the game!
Yes there is a second King Tut mode. it's on the right side of the screen. When you complete this mode you light the season 3 insert.
There is room for a lot more minor vilain modes because there are a lot of empty spots in the selection screen...!!!
This is a good solution for the stuck-target problem: https://pinside.com/pinball/forum/topic/batman-66-official-club-thread/page/135#post-4085344
That’s what I like about Stern...they make simple games and they make deep games. So there are Stern pins for every kind of pinball players.
ok another question:
If you completed Mr. freeze, than lost your ball and complete Bookworm with your next ball, will you get your Mr. Freeze back? Or do you have to replay Mr. Freeze? Can I do that with a Mad Hatter? It's not a failed minor villain mode...
Or do I have to play Mad Hatter first and than Mr. freeze? With the same ball or not?
If I complete mad hatter (replay all minor villains), is this for the rest of the game or do I also neef to get a bookworm?
Thx for the help, this game rocks !!!
But when you drain your ball, you lost all those multipliers?
Edit: you can keep the main screen multiplier from king tut if you got a bookworm?
Quoted from cooked71:Just realised how similar this layout is to AFM.
are you serious??
You're currently viewing posts by Pinsider pascal-pinball.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/batman-66-official-club-thread?tu=pascal-pinball and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.