Quoted from docquest:Here's a summary of the typical problem.
[quoted image]
Im gonna try the foam fix to keep the taget from getting stuck. I need to go to the hardware store to buy some weather stripping to use for my foam.
I am having a similar Joker Target #1 issue. (I may not be visualizing the getting hung up on the bracket part) But my right Joker Target appears to be installed too low so that the bottom of the target is unable to clear the surface of the playfield, thus keeping the target registered. I have tried pushing the target up and onto the playfield but am nervous about breaking the target. The few times that I have been able to get the target up and forward onto the playfield, it drops back below with one good shot from the ball.
Is there a way to fix this without taking the turntable apart?