Batman 66 (LE)
Stern, 2016
Batman 66 (Premium)
Stern, 2016
Batman 66 (Super LE)
Stern, 2016You're currently viewing posts by Pinsider dexter.
Click here to go back to viewing the entire thread.
Quoted from Bearcat:Has anyone had this happen? Turntable stopped working, received this error:
Check the Node Board 9A and 9B that run to the motor control board. I have two replacements coming from Stern because I was receiving the same error. It is losing the connection. I think that is it. Good luck.
Quoted from ASOA:he other side of that spectrum. I need a topper on everyone of my games. If there is a person out there that would part with it. I'm over here. Just let me know.
I think you are crazy Jonathan 
Quoted from Yelobird:Stern has been Really great on stepping up for these board issues. I also had a Nod board issue and Chaz (Stern) had it replaced in short order. Sorry to see your down hopefully not long!
I too had board issues right out of the box - Chaz was quick to help as well.
Quoted from FLpinball:New member to the club! Played it at its initial release and passed. Glad I revisited the game recently as it is like night and day with the upgraded code! What fun...which for me in what Pnball is all about. This game just puts a smile on my face. Watched the series as a kid in the 60’s which makes it that more special. Shout out to Curly at Little Shop Of Games for making it happen! Best, Charlie
YEAH Charlie! Welcome to the Club!
V0.93.0 - Jul. 25, 2018
=======================
- Added new Mad Hatter mode: Season 2, Episode 69 ("The Contaminated
Cowl") and Season 2, Episode 70 ("The Mad Hatter Runs Afowl").
- Added new King Tut mode: Season 3, Episode 100 ("The Unkindest Tut
Of All").
- Fixed an issue where the small TV for the BATUSI mode was not going
away at the end of the mode.
- Fixed an issue where the High Score To Date for the BOOKWORM mode
was using the score information for the EGGHEAD mode.
- Fixed an issue with MAD HATTER 13/14 where the first stage of the mode
would show incorrect background frames after the first shot was made.
- Increased the brightness of the background illumination when the super
jackpot lamp is lit.
- Removed dim the background illumination when the super jackpot has been
lit but then is not available (i.e., during multiball).
Quoted from docquest:Didn't like how the graphics that came with the Stern headphone plate looked on my Batman66.
[quoted image]
So I came up with this instead.
[quoted image]
Doc - when will you start selling this???? AWESOME!
Quoted from BrewinBombers:I'm curious what folks think would be a good pair with B66? I (currently) have space for one more next to Batman and I'm trying to decide what would be a good change of pace.
My basic criteria:
* Kid and Old person friendly-ish. My in-laws and grandparents visit frequently enough that I just don't want to hear them complain. Rules out TWD.
* Relatively low maintenance. I don't particularly enjoy fixing games all the time. So, probably not STTNG.
* Not basically the same layout as Batman; I'm looking for some variety of play.
What would be ONE game to put with it?
Eventually I am going to have a Stern Superman 78 sitting next to the Batman 66!
BM66 is hands down my go to game in my collection. That's after over a year - staying power. Lots of fun. Everyone needs BM66 in their collection if at all possible!
BM66 top 20 on Pinside list now! When I bought it was sitting around 55. Awesome game and glad it's getting known!
Quoted from Happy81724:Very cool, is franchi still doing art? I love his stuff
Franchi will be at the Pinball Expo as far as I know.
Quoted from HighProtein:Traded games that I had on route years for a game that'll earn well in the future. For now it's in my garage to enjoy!
Already put titan glow in the dark post rings and classic clear pinball rings on the slingshots and a few other places.
[quoted image]
Welcome to the ULTIMATE Club CODY!
Insider Connect BM 66 Question:
I am using the coin door pinball life headphones kit in conjunction with the Stern Insider QR Reader. All my other prem/le games that I am adding this kit to has an open CAT5 slot in the NODE 8 board except Batman66. The CN4 is coming from Node 0 behind the translite and CN5 is going to NODE 9. Do I need a splitter like this and do I put it at CN4 or CN5 to connect the QR reader CAT5?
https://www.amazon.com/gp/product/B09GLMYRM1/ref=ppx_yo_dt_b_asin_title_o01_s00
ddae0c1d2235630eafe36b6cb55260c231ff464d (resized).pngQuoted from Dexter:Insider Connect BM 66 Question:
I am using the coin door pinball life headphones kit in conjunction with the Stern Insider QR Reader. All my other prem/le games that I am adding this kit to has an open CAT5 slot in the NODE 8 board except Batman66. The CN4 is coming from Node 0 behind the translite and CN5 is going to NODE 9. Do I need a splitter like this and do I put it at CN4 or CN5 to connect the QR reader CAT5?
amazon.com link »[quoted image]
Answering my own question - yes the splitter works and needs to be added into the CN4. This is the only way to retro the QR reader.
You're currently viewing posts by Pinsider dexter.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/batman-66-official-club-thread?tu=dexter and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Cream Ridge, NJ