Batman 66 (LE)
Stern, 2016
Batman 66 (Premium)
Stern, 2016
Batman 66 (Super LE)
Stern, 2016You're currently viewing posts by Pinsider bajm.
Click here to go back to viewing the entire thread.
Quoted from Budman:My table coming in March....having fun shopping for mods. Feel free to give me your “ must haves” so far I have ordered the Chrome Candy bat plaque and for sure, the Atomic pile , Cliffy’s and will do some scoop lighting. What else? It doesn’t take long to spend $300 !
I personally really like the crane upgrade kit from Tmezel (mezelmods) as it really adds to that toys look in the game... (both the lattice underneath and the dome topper).
IMG_7646 (resized).jpgQuoted from TronGuy:I installed a shaker motor. It does not currently any capacitor, diode, resistor between it and its connection to power.
Here’s a picture of where the capacitor goes on the board on the side of the cabinet from the shaker... (sorry it was quick and dirty).
D9146851-EB8F-4A80-8C5E-1D368AF2FE9C (resized).jpegFor those that want batgirl Backbox decals (instead of Batman and robin on the premium Backbox)... I reached out to stern about them. At first, they thought I was asking for cat woman and gave me a lame warranty response but then apologized and said I can get them through my distributor...
“My apologies……….I was thinking of the new Catwoman version, not Batgirl. You can purchase those decals through one of our dealers. Here is a link to find the nearest dealer to you. The part number for the right backbox decal with Batgirl is 820-78I0-02 and the left is 820-78I0-01.”
I reached out to my distributor and they ordered them for me. They were $28.50 for each side (plus tax). I held my breathe until I got them (not entirely sure what I’d get). Get them while you can!
FD9E57F4-47BE-4DD8-861E-C0CBAA1B6554 (resized).jpegQuoted from Batman60:Does anyone know if you can order Catwoman panels? I ordered the Batgirl, was thinking it would be cool to put Batgirl on one side and Catwoman on the other, Thoughts?
I’m pretty sure that they will say no to that unless you have cat woman already - they were very quick to tell me no until they realized I wanted batgirl. You could ask someone with a cat woman edition to ask for a replacement (that might work). Not a bad idea having one on each side but I’m partial to batgirl so happy to get the decals I got.
Quoted from Scotty_K:Glad you like what I did; it was a labor of love...lol!
Actually, I've had a couple of inquiries regarding this. I hadn't originally planned to make and sell these, but I suppose I could run off a couple of sets if there is enough interest. It may take a few days, however, as I do have a full-time gig and this would be a spare time project.
I'll sit down soon and figure out what needs to be done and what it might cost, and I'll get back to you.
I’m interested as well - looks great!
Quoted from zaki:Yes, cat women was later. Not sure you will find any of this left. I don't know any issues with batman 66, but I'm not a person with games on location.
I think cat woman just had different translight art, nothing more
The backbox decals were also a cat woman exclusive. But yes, cat woman edition is the newest version and will have latest tweaks for left ramp and turntable.
Quoted from thundergod76:There's so many Hot Wheels variations to choose from. It really comes down to personal taste. I originally had the flat finish one with cheesey black flames on it. Upgraded to the one below. 1/64 is the best size IMO. I dont think anything else will fit to be honest.
[quoted image]
Thanks for the info... That really helps!
Quoted from Wotto:[quoted image]
It's a key post and a pretty sweet chart that helps understanding all the minor villains.
https://pinside.com/pinball/forum/topic/batman-66-official-club-thread/page/259#post-4931732
Quoted from beekey:I had a helluwa game the other day. Any suggestions on an extended minor villain strategy?
When you have completed all three minor villain wizard modes (Batusi, Gas attach, Holy MB) it all starts over and all minor villains are lit again.
Assuming you already scored Bookworm, Freeze, Mad hatter in the first round, it seems going for them again is meaningless since you already have their awards. I assume it's Tut / Shame all day from there?[quoted image]
Wow - what a score! Was the glass off? I’m the wrong guy to ask on strategy b/c I’m not good enough yet to get more than 2 minor villains in one game (much less see any of their wizard modes).
Quoted from RDReynolds:Have a friend looking for a B66 Premium or Catwoman in the Denver area...does anyone know a good dealer I could point him to if they are doing a new run as rumored?
I bought mine from JJ at Gexchange (Game Exchange).
Quoted from pghpinfan:Turned on my Batman this AM and all of my high scores are erased with the exception of Grand Champion score. Any idea what could cause this?
In the adjustments… default is reset of scores at 2000 plays (but doesn’t reset GC). Can change number…
Quoted from rai:That’s crazy
It’s actually pretty standard on all recent pinball machines.
Quoted from Ajoelson579:My premium does this.
Mine too… and it’s more interactive then just when the bat phone is ringing. It also activates during bat turn mode, during the hurry-up with bat-cave shot and they slide down the poles as well as some other times. It’s a really neat, interactive and theme integrated topper add-on. Very much worth it!
You're currently viewing posts by Pinsider bajm.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/batman-66-official-club-thread?tu=bajm and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Denver, CO