Batman 66 (LE)
Stern, 2016
Batman 66 (Premium)
Stern, 2016
Batman 66 (Super LE)
Stern, 2016You're currently viewing posts by Pinsider Chrizg.
Click here to go back to viewing the entire thread.
2 questions. I swear the demo models had bumpers on the head for laying it down on the rails. Does your prem have them? Mine has holes for what I would guess is bumper pads.
Does anyone else with a prem have a card that is not signed ? Is that an LE/SLE only thing ?
Quoted from docquest:Adam West signed 500 cards total, 80 for SLE, 240 for LE's. What was left over was supposed to go for premiums. So the answer is maybe depending on how early your premium was built.
Dec 27 build date. I would think that was in the time frame
Annoyed with this game looking it over. Both wire forums need adjusted. Magnet core needs leveled. I can feel every insert and they are not perfectly level with the play field. They are all raised up a tiny bit. One has a imperfection which seems like will get worse when the game gets play and the ball starts hitting the edges of the inserts.
Not happy here. I've had raised insert games before but the raised part is smooth to the touch.
Quoted from thundergod76:Wow! I paid in full for my Pre in Oct. in hopes of getting a signed card. If I don't get one I'm gonna be pissed!
Maybe you will also get a creased/bent non signed card also.
I've never had this many issues with all the Sterns I have bought. Crazy
Edit - feature matrix doesn't list prems get cards and I am being told signed cards are only LE/SLE. I do recall something about some prems would get them as long as they have signed avail. Not a big deal, annoying that the card is bent but whatever.
Quoted from Sethman:I'm in today as well.
Premium. 1st game screw from under batmobile and washer went flying lol.
Get those screws glued in guys, only matter of time
Can't wait to put more time on this.
Is your apron card signed by Adam or no sig ?
Magnet needs to be flush with playfield. That bat mobile looks like it was dragged across the factory floor on one side of it.
I would probably buy a set of those! The lower screw holes are not needed as most probably won't use them
Quoted from bemmett:You or anyone have a link to where PBL(or anyone) sells these mylar protectors, all I see is little small magnet ones, not the large ones?
Quoted from cooked71:Just an idea for anyone getting rejected or rattley left orbit shots, try this out:
Move the left nib rubber from the outside of the left ramp to the inside. With the PF fully up, Just need to undo the ramp nuts from under the pf, then remove the small screws that hold the rubber, and move it to the inside of the ramp entrance, then re-attach (I think you might have to flip the rubber so the holes line up).
Does the same job, but opens up the left orbit a lot. I haven't noticed that The left ramp entrance is any different. A miss hit left orbit shot still occasionally rattles a bit, but never rejects.
Be great if others could try it to see if they notice the difference.
Moving that bracket to the inside of the ramp will tear the balls up. It will do more harm than good as the scratched balls will tear up the playfield.
Quoted from cooked71:You talking about the screw threads on the left side?
Yes, the ball will hit that bracket and screw heads a lot. The bracket is on the outside of the ramp for a reason
You're currently viewing posts by Pinsider Chrizg.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/batman-66-official-club-thread?tu=Chrizg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Des Moines, IA