Quoted from Pinzap:This particular ring was quite easy to install... but didnāt realize until afterwards that it required removal of ONE major part.
[quoted image]
Your pin balls
(Topic ID: 167576)
Linked Games
Batman 66 (LE)
Stern, 2016-
Batman 66 (Premium)
Stern, 2016
-
Batman 66 (Super LE)
Stern, 2016
Topic Gallery
North Attleboro, MA
Quoted from AUKraut:No, you will need to unscrew the LCD from the turntable and move it to the side. Same thing for the Atomic Pile, unscrew and move it aside.
Taking those parts off is the perfect time to install Yelobirds atomic pile mod.
Quoted from docquest:Taking those parts off is the perfect time to install Yelobirds atomic pile mod.
Agreed!!!
Warrington
https://pinside.com/pinball/forum/topic/most-improved-pin-with-code-#post-4581355
BM66 should be winning this poll by a country mile! Letās show pinside just how good this game is now, too the voting poles!!
Quoted from AUKraut:No, you will need to unscrew the LCD from the turntable and move it to the side. Same thing for the Atomic Pile, unscrew and move it aside. Then you can remove the plastic covering the posts where the ring mounts. Just take your time, and take a pic of every screw and part you remove for reference when you put it back together.
You want to do this with the power turned off, and you may want to first move the turntable in test mode into a position where the access to the LCD and Atomic Pile mounting screws is easier. DO NOT try to move the turntable into place by hand as you can screw it up easily doing that, use the service menu instead.
Thank you AUKraut
Did some mods to my BM66; added the Atomic Pile and change the Bat Phone. At the same time I had to replace a rubber ring. Now my turn table is out of wack it cant turn. Currently the Bat Computer is up against the pinball railing that goes around the turn table. Any suggestions on how to fix this?
Quoted from AdeptJR:Did some mods to my BM66; added the Atomic Pile and change the Bat Phone. At the same time I had to replace a rubber ring. Now my turn table is out of wack it cant turn. Currently the Bat Computer is up against the pinball railing that goes around the turn table. Any suggestions on how to fix this?
Remove the modifications and see if everything works again.
Quoted from J85M:Congratulations on the purchase.
What did you get HUO/NIB? Prem/LE?
NIB Premium - Family loves it!
Lets give some love to BM66 on this Pinside poll!
https://pinside.com/pinball/forum/topic/best-pinball-release-in-the-past-5-years
Quoted from J85M:Already voted for BM66, which thanks to Lyman is easily my favourite game in the last 5 years.
Too late - apparently not worthy as it didn't make the subsequent "Pt. 2 Show Down" poll thread. 
Quoted from Tuna_Delight:Too late - apparently not worthy as it didn't make the subsequent "Pt. 2 Show Down" poll thread.
I know...he moved on after a day and a half.
Newcastle
Quoted from Macca101010:"Batman here, me and Robin want to wish you a most excellent Batman Day! That's right boys and girls, today, September the 15th is the official Batman Day!" [quoted image]
BE619746-127D-4948-8E1D-F45CFB499051 (resized).pngItās set up and working 100%.
B636A039-42ED-4B14-8EFB-1912967940D4 (resized).jpeg79955E6F-40CC-485B-9171-ACBDAC7C6E58 (resized).jpeg69A198DB-2C4B-4C7B-99F0-888B45276FB4 (resized).jpeg4EF918A9-E4A6-4054-9F1D-1085737D955C (resized).jpeg2EA04697-33D5-4055-AC6A-346FB1C31DD6 (resized).jpeg2D4AFBBE-8DFA-496F-B2C1-7E49A252C539 (resized).jpeg21BE6E74-EBE8-4F22-922F-0F8E3411BC81 (resized).jpeg
We did have some issues out the box. Check out this wire that was wrapped about the motor of the turn table. The wire was rubbed bare, we are lucky it didnāt fry the board... Iām not even sure how the wire got tied up around the motor, must have been assembled that way. 
Fixed now though.
CCAE05D6-B132-40E5-8A27-640478AB3F94 (resized).jpeg02BFB2BA-8EEB-477C-B1C1-75527DA7BF7F (resized).jpeg
Quoted from TigerLaw:We did have some issues out the box. Check out this wire that was wrapped about the motor of the turn table. The wire was rubbed bare, we are lucky it didnāt fry the board... Iām not even sure how the wire got tied up around the motor, must have been assembled that way. Fixed now though.
[quoted image][quoted image]
Congrats on a great game Tiger and Pav!
You got lucky, I had a mess down there with wiring completely sheared off by the motor. Had to install new turn table!
Quoted from TigerLaw:Itās set up and working 100%.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Super congrats!!!! a great pin!!!!....mark
Holy jambalaya! Who dat say dey gonna beat Batman?
Congrats on FINALLY joining the club you started!!!
Quoted from TigerLaw:We did have some issues out the box. Check out this wire that was wrapped about the motor of the turn table.
[quoted image][quoted image]
Join the club, same thing happen to me and I got mine a long time back.
Quoted from TigerLaw:Itās set up and working 100%.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
About time the OP of this thread and the best club thread on Pinside joined the owners list 
Congratulations Tiger, hope your loving the game so far.
Quoted from J85M:About time the OP of this thread and the best club thread on Pinside joined the owners list
Congratulations Tiger, hope your loving the game so far.
Agreed never noticed he was the creator of this thread. Lol. Congrats now you get to experience all the commentary live. I actually have my wife play solo just so I can watch all the incredible new animations. Truly exceptional and always a blast to play. Congrats.
Quoted from J85M:About time the OP of this thread and the best club thread on Pinside joined the owners list
Congratulations Tiger, hope your loving the game so far.
We are loving this game so far. TigerLaw is updating the code from .92 to .94 now. Iām going to look for a different trading card, something with less rodent action on the card I am thinking.
I need to find a bat signal topper to, that topper may be the best one in pinball.
Quoted from PavBall:We are loving this game so far. tigerlaw is updating the code from .92 to .94 now.
As soon as he has updated that code push him out the way and hit start, Iām sure he has some cleaning to do round the house while you play a few dozen games 
Quoted from J85M:As soon as he has updated that code push him out the way and hit start, Iām sure he has some cleaning to do round the house while you play a few dozen games
I should snag TigerLawās phone and use his Pinside account to mark this as a key post!!
Quoted from PavBall:Iām going to look for a different trading card, something with less rodent action on the card I am thinking.
Two of my favourite that I have seen in the game are these two. 98F5FF79-828E-46EF-B0B5-E6AD9D488A2D (resized).jpegCAF74E9C-3AF3-4973-860F-B17DB0C0BC6F (resized).jpeg
I particularly like Midnight Conference as the colours on the card, match perfectly with the red and yellows behind Batman and Robin on the apron.
Quoted from PavBall:I should snag TigerLawās phone and use his Pinside account to mark this as a key post!!
Do it! 
Quoted from J85M:As soon as he has updated that code push him out the way and hit start, Iām sure he has some cleaning to do round the house while you play a few dozen games
Quoted from PavBall:I should snag TigerLawās phone and use his Pinside account to mark this as a key post!!
Sheāll have to wait. I canāt seem to get the code update through. I pulled the data off the stern website through a mac and not a pc, perhaps that is my problem. Unlike Aerosmith, which read it immediately when it was the usb was installed on the machine, this game is not recognizing the usb is even in there.
Any thoughts? Thanks in advance. 
Quoted from TigerLaw:Sheāll have to wait. I canāt seem to get the code update through. I pulled the data off the stern website through a mac and not a pc, perhaps that is my problem. Unlike Aerosmith, which read it immediately when it was the usb was installed on the machine, this game is not recognizing the usb is even in there.
Any thoughts? Thanks in advance.
Is there anything other than the BM66 update file on your USB? I always have the most success when I only have the update file I am doing at that time.
Quoted from TigerLaw:Sheāll have to wait. I canāt seem to get the code update through. I pulled the data off the stern website through a mac and not a pc, perhaps that is my problem. Unlike Aerosmith, which read it immediately when it was the usb was installed on the machine, this game is not recognizing the usb is even in there.
Any thoughts? Thanks in advance.
Fairly straight forward on a Mac. Find the file in your download folder, double click to open it, drag the 3 files from that open folder to a proper USB stick that is Empty and your done.
Quoted from J85M:Any SLE owners visit this thread anymore?
Been busy for a while with health issues last summer and moving, then starting a working ranch but I'm back in the thread and loving where this has gone!
Has anyone heard anything about the "Answer the phone YOURNAMEHERE" callout? The callout is in the code but not yet turned on that I know of. As I understand it all SLE owners had their names recorded by Adam West and it was done to be used with the Batphone feature. I spoke to George Gomez at TPF and he said that it was going to happen but there was some issue (maybe the licensee?)
Downloading new code now!
Quoted from Yelobird:Fairly straight forward on a Mac. Find the file in your download folder, double click to open it, drag the 3 files from that open folder to a proper USB stick that is Empty and your done.
Got it. Thanks! Updating now. PavBall and her friend will be playing it again shortly.
46315A75-7538-4089-9A3F-C85E01852C86 (resized).jpegDF3AB4B8-7A75-4322-A7BF-869E3181CE3A (resized).jpeg
Quoted from MT45:Been busy for a while with health issues last summer and moving, then starting a working ranch but I'm back in the thread and loving where this has gone!
Has anyone heard anything about the "Answer the phone YOURNAMEHERE" callout? The callout is in the code but not yet turned on that I know of. As I understand it all SLE owners had their names recorded by Adam West and it was done to be used with the Batphone feature. I spoke to George Gomez at TPF and he said that it was going to happen but there was some issue (maybe the licensee?)
Downloading new code now!
I didnāt see it in Pinball browser. You have any idea where they are in the sound calls?
Quoted from eharan:Had a great game on my Premium Friday night.
Insane score Ed! Wow, just got mine and havenāt cracked a billion yet. Such an amazing game, bummer the future code updates are gonna wipe that out
Quoted from GorillaBiscuits:Insane score Ed! Wow, just got mine and havenāt cracked a billion yet. Such an amazing game, bummer the future code updates are gonna wipe that out
He can frame that score. That's one hella score! I meant to say :
Holy Batman Score
Quoted from Lonzo:I didnāt see it in Pinball browser. You have any idea where they are in the sound calls?
Sounds/Sound Scripts/Type "0x970" in the search bar. Name callouts are listed alphabetically. However, these script numbers tend to change with every new code update.
Quoted from thundergod76:Sounds/Sound Scripts/Type "0x970" in the search bar. Name callouts are listed alphabetically. However, these script numbers tend to change with every new code update.
Thanks. I was wanting to go through the list and see if āIā am there. Lol
Quoted from pintechev:Remove the modifications and see if everything works again.
Found the issue, it is the bat-computer add-ons, they are just a bit to high and run into the pinball railing that goes around the turn table.
Quoted from AdeptJR:Found the issue, it is the bat-computer add-ons, they are just a bit to high and run into the pinball railing that goes around the turn table.
As I noted via PM, we have sold over 250 of those computer kits without an issue so I suspect your game or disassembly has a minor miss-adjustment. I suspect as I have seen in one or two the ramp is slightly bent down or the washer under the ramp post is missing. Simple adjustment honestly. Can't imagine your game was made different then others other then you taking apart the turn table. I'm certain you can get it fine tuned.
I just started going through the sounds on pinbrowser and see a bunch of good tilt callouts, I wonder when we're going to get those? They're under request 50 in the sounds. "Aw gee Batman, I guess I was a little rough." -Robin
Quoted from Yelobird:As I noted via PM, we have sold over 250 of those computer kits without an issue so I suspect your game or disassembly has a minor miss-adjustment. I suspect as I have seen in one or two the ramp is slightly bent down or the washer under the ramp post is missing. Simple adjustment honestly. Can't imagine your game was made different then others other then you taking apart the turn table. I'm certain you can get it fine tuned.
Dont get me wrong, I am not blaming the product. I am just stating the fix was simple for my turn table. I will tweak with it a bit to see if I can get the computer mods on.
I put together a list of all the personalized call outs I found in the browser, here they are in the order they appear in the sound scripts starting at 0x970.
Al, Alex, Andrew, Bob, Brandy, Brett, Buddy, Carl, Charlie, Chris, Dan, David, David, Dennis, Dino, Ed, Eugene, Frank, George, Haarold, Harold, Jacklyn, Jerry, Jim, Jim, Jimmy, Joe, John, John, John, John, Julian, Justin, Ken, Kevin, Kevin, Kevin, Lee, Loyd, Loyd, Markus, Mark, Martin, Matt, Michael, Mckayla, Mike, Mike, Mike, Mike, Mike, Dale,(?) Paul, Paul, Peter, Peter, Peter, Rich, Rich, Richard, Robert, Ron, Ron, Saul, Scott, Stephen, Stephen, Thomas, Tim, Tim, Todd, Todd, Tony, Travis, Victor, and Victor. The next sample is an adorable personal message to Burt's wife(?) Tracey.
Quoted from Jahkub:I put together a list of all the personalized call outs I found in the browser, here they are in the order they appear in the sound scripts starting at 0x970.
Al, Alex, Andrew, Bob, Brandy, Brett, Buddy, Carl, Charlie, Chris, Dan, David, David, Dennis, Dino, Ed, Eugene, Frank, George, Haarold, Harold, Jacklyn, Jerry, Jim, Jim, Jimmy, Joe, John, John, John, John, Julian, Justin, Ken, Kevin, Kevin, Kevin, Lee, Loyd, Loyd, Markus, Mark, Martin, Matt, Michael, Mckayla, Mike, Mike, Mike, Mike, Mike, Dale,(?) Paul, Paul, Peter, Peter, Peter, Rich, Rich, Richard, Robert, Ron, Ron, Saul, Scott, Stephen, Stephen, Thomas, Tim, Tim, Todd, Todd, Tony, Travis, Victor, and Victor. The next sample is an adorable personal message to Burt's wife(?) Tracey.
I SO hope some computer smart person figures out a way to sell us the mod to add this call out. Would be a Way cool feature in my book.
Quoted from Yelobird:I SO hope some computer smart person figures out a way to sell us the mod to add this call out. Would be a Way cool feature in my book.
Agreed, especially since my name is in the list.....
Iād also love to turn some of the music into ringtones!
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
