i have changed the jumpers for 2732's to run on a original mpu (2518-35)already
i burned u2 without a problem but u6 is giving me problems.
tried several blank chips and same thing.
is there a special way to burn this chip??
You're currently viewing posts by Pinsider gameover1173.
Click here to go back to viewing the entire thread.
i have changed the jumpers for 2732's to run on a original mpu (2518-35)already
i burned u2 without a problem but u6 is giving me problems.
tried several blank chips and same thing.
is there a special way to burn this chip??
There were a couple sites online where it said the rom was already converted to 2732
http://arcarc.xmission.com/Pinball/Roms/Pinball/Bally/
Quoted from gameover1173:There were a couple sites online where it said the rom was already converted to 2732
This was one of them
http://arcarc.xmission.com/Pinball/Roms/Pinball/Bally/
Using a gq- 4x4 programmer
Here is the error
Write failed address=0x00087d
Buffer=0xfe device=0xff
This is what is says when trying to write it
Its seems to fail at the same point
These chips are erased and blank before starting. I'll giving that a shot with that type command and report back later.
Thanks for the help this far
How do you do this
Or just use the gq- 4x4 programmer software to load the "720-35_6.716" file at buffer address 0x000, and also at buffer address 0x800
Fairly new on this
I am matching the brand with the correct software. Just not familiar with this rom burner with doubling. Same with using dos
I haven't used it in many years. I couldn't get it to work in dos either. Any chance I could get someone to send me the file doubled?
You're currently viewing posts by Pinsider gameover1173.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ballys-viking-u6-rom-?tu=gameover1173 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.