I've been having issues with xenon , it's in the garage and gets played a ton ..

She was blowing f-4 randomly , I'd leave her on for a few days and then all of the sudden it would blow the fuse .. So I cut the wires to the lockout coil .. After replacing the power supply components ..

Then the flippers randomly died during a big game 1.8mill .. ... Weird? But the game worked fine until a couple days ago when the flippers got weak and died.. So I rebuild all the connectors on the driver and rebuild J2 on the mpu ..

So I figured out If I push and hold down the flipper relay the flippers work ? Any ideas or do I call alltec

Thanks.

image.jpg

Alltek mpu as well .... I miss my old boards , I have had nothing but issues with these boards. .ive changed all my connectors by now , what activates the coil relay? I have power at the flippers ..

It's been , as usual a WTF MOMENT all around

CBW xenon JP AND QD

all down , any Oregon pinheads willing to come to the coast , free fishing guide and all the steelhead , crab , clams, mussles , and goose necks you can eat

Are you getting 43 or so volts at the coils ? Put the black on the braided grounds and the red on one of the lugs of the flipper coils..