(Topic ID: 292587)

Bally Xenon 12 Volt Line Blowing Fuse. New Rectifier Board. PleaseHelp

By StotzBotz

2 years ago



Topic Stats

  • 3 posts
  • 3 Pinsiders participating
  • Latest reply 2 years ago by BigAl56
  • No one calls this topic a favorite

You

Linked Games

No games have been linked to this topic.

    #1 2 years ago

    Hello Friends. I recently purchased a new power supply rectifier module board for my Bally Xenon machine because I wasn't getting the 12 volt dc or the 6 volt ac voltages from the old board and the fuses had blown for those 2 lines. After installing the new board it blew the 12 volt line fuse however the other voltages are fine. Would anyone possibly be able to tell me how to properly diagnose what's going on here? I'm just not sure where to begin and would greatly appreciate some guidance.

    #2 2 years ago
    Quoted from StotzBotz:

    Would anyone possibly be able to tell me how to properly diagnose what's going on here? I'm just not sure where to begin and would greatly appreciate some guidance.

    If you could unplug 12 volts going out. Put in a new fuse. Then turn the game on and using a meter see if you have 12 volts going out. If so and fuse doesn't blow. You have an issue on that line out in the game.

    LTG : )

    #3 2 years ago

    Assuming not the board. Unplug all the other boards and observe. The fuse should not be blowing. Now plug back in the, Solenoid Driver, MPU, and sound board in that order. You should be able to narrow it down. Maybe a bad filter cap.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


    This page was printed from https://pinside.com/pinball/forum/topic/bally-xenon-12-volt-line-blowing-fuse-new-rectifier-board-pleasehelp and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.