Hello!
I have a bally viking which when i got it had problems with making the full bonus collect saucer shot from the left flipper. It seems like the left flipper just dont have enough power to send the ball into the saucer so it kinda ends in the left bumper.

To try fix this, I rebuilt both flippers, and saw that the left flipper button cabinett switch was really worn, so i replaced it a new. But still the flipper dont manage to send the ball all the way up and over into the bonus collect saucer.

Do anyone have any ideas? I have attached photos of the eos switch and the cab switch gap, and also made a video of a couple attemps to show how it just fails to go around. Thanks!

Video:

20190206_193113 (resized).jpg20190206_193147 (resized).jpg20190206_193130 (resized).jpg20190206_193144 (resized).jpg20190206_193445 (resized).jpg20190206_193520 (resized).jpg20190206_193802 (resized).jpg

Should the gap start early or late in the movement?

Thanks will try. Is it just to adjust all three leafs on the switch until one get right feel, or only the middle leaf for example?

How presicely did you use the t nut and machine screw to hold it in place?

I did some more testing and I cant really see that the EOS is problematic. Its not really getting significantly weaker og stronger.

I there something else I could try, like changing to a stronger coil, if not for anything else than testing?