Hi all, I’m a fairly green pinballer, and recently I bought my first pinball machine Bally’s Vector. I’ve been working on bulletproofing my non working Vector. I have all proper voltages on my rectifier board’s test points. BUT I have a weird 178mv DC on my sol. driver board at TP 1 and 3. My other TPs on the solenoid board are fine. I’ve replaced the high voltage components (high voltage repair kit) AND the 5v side has had everything replaced except the two large disc capacitors which my parts supplier forgot to ship in the 5v repair kit. Wondering if anyone knows where I should start looking in order to get my 5v DC? Thanks gang