I'm new to the club and wanted to get some advice on how to more effectively LED the backbox to really make the translight pop. I purchased my machine from a fellow pinsider and he previously installed a cointaker LED kit...but I feel like the backbox lighting could use some color.

I'd greatly appreciate it if folks could take pics of their translites lit up and a pic of the backbox LED layout as well so I can get some ideas.

Thanks in advance...I love TAF!

As somewhat of a pinball newbie, I'm hoping you fine folks can help me diagnose and fix an issue with my Addams.

The left side of my GI lights went out while I was installing (with the machine off) a trough lighting kit (led strip with alligator clips). I noticed the 5 amp fuse (the lower left one) blew so I replaced it hoping that would solve the issue but it did not. I've checked the wiring harness at J-120 (the schematic says that's the one that controls the left GI string). I also checked the voltage at the new fuse and I'm getting about 7.5 volts.

Not sure what else to look for or check. I have a multimeter, but not sure how to use it to help diagnose this issue.

Any help would be greatly appreciated. Perhaps the wire for the trough LED strip was touching metal when I turned the machine on? I have since removed the led strip.

Thanks!

image_(resized).jpeg

Problem fixed! Turns out that one of the other fuses was also blown but not as visually obvious. Popped a new fuse in that one as well and it's good to go!