Joined the club this weekend with a dirty players condition game. Needs some love but I think it will clean up nice. No lights worked but I had enough leds to put in. I’m not sure if I like natural white or sunlight better. What’s the popular opinion around here?

My game is the one on the left, the one on the right is my friends that I’m currrebtly borrowing to see if I actually wanted an Addams!!

8BE29C0F-593E-4F59-AAEE-69B411983149 (resized).jpeg

What’s the preferred game roms?

I had to rebuild the pop bumpers in my game so I decided to do a little bit different twist. Clear bodies, green skirts, comet discs, and starburst caps (caps on order). I’m pleased with how it came out

10B8A80F-9F03-426F-BEAD-7F213ED05DE3 (resized).jpeg

I was having a few issues with my bookcase optos not registering so I decided to just replace the opto boards because the originals had some hacks on them. Now they don’t work at all. I’ve checked all the other optos in the game and they register good. All the switches in the matrix work too. Swapped out another bookcase asemblu and it worked. Swapped the unworking one into another game and still doesn’t work. I’ve checked continuity and everything is fine. I also swapped out a few 7-opto boards to see if it was a board problem. Still no change. I’m stumped here

After a few nights of work, I finally figure out that it’s a bad replacement bookcase opto board. Put the original back in and it kinda worked. I guess I’ll just get the parts to rebuild it, and see what I need to do with this new one.

I finished the top side cleaning of the game, and now I’ll start on the underside. The only thing I need to figure out now is why the chair and swamp kick out are weak. Hopefully a good cleaning will help

555E0C8E-0B14-46C6-9737-4F1B5BF87063 (resized).jpeg

But was the processor chip in there?

I’ve posted this here before but clear bodies, comet discs, and the starburst pop caps are a good combination

C09B0419-DCB5-4D31-A593-BD76EA180DFE (resized).jpeg