Quoted from glpinball:

Here you go: one pic of some of the mansion wear, mansion stripped and then with sticker on pre-touchup and after touchup with playfield protector on. [quoted image][quoted image][quoted image][quoted image][quoted image]

Quoted from Neal_W:

If you go to test #5, you can test each flasher and pair of flashers and it tells you which wire it uses:
number 17:
location: phone + upper right ramp flashers
wires: black w/brown dots and red w/ white dots
number 18:
location: train + upper left ramp flashers
wires: black w/ red dots and red w/ white dots
also make sure the flash bulbs are not blown.

Quoted from SkyKing2301:

Hey TAF owners ... I've been having a ton of fun making these new products, so here's one for you:
There are plain old original stock coin reject buttons ... then there are aftermarket coin reject buttons with flat 2-D patterns -- I'm taking it to the next dimension with these new 3-D Coin Reject Buttons!
[quoted image]
These eye-catching buttons literally pop out at you! They're 3D-printed with multiple filaments, including a translucent red which allows the coin insert light to glow through. For TAF, they feature Uncle Fester's chair -- modeled with gaps in the slats and legs to allow more red light to glow through.
[quoted image]
[quoted image]
Available on my website (https://rocketcitypinball.com) or in my shop here on Pinside (https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/04821-3d-coin-reject-buttons-addams-family). (My daughter gets a commission too; these 3D buttons were her idea!)
Note: please check your game before ordering -- this button replaces P/N 27-1037 button & 27-1038 cover. I've seen a few pics of some TAF games with a different type of button, so compare to my pictures to be sure this is the correct one for yours (button is separate piece from slot).