Haven’t had a ton of time to mess with this, but I’m getting a switch 85 and thing limit error.

The hand moves while in tests, it always shows the up-Opto as active during said test. Didn’t see this particular issue anywhere and wonder if anyone has seen it.

Edit: I did reseat the power cable to the board and fuses appear fine, but I won’t be able to do much else for a while.

Getting ready to do a playfield swap. Wanted to test out Mother’s metal polish, and I’m impressed.

26CF5616-28A5-4AAF-AF80-6DE2A69D0C5F.jpeg

edit: disregard

Playfield swap is finished, only two issues remain I’m looking for help with. The very back two GI bulbs have no power and not a single flipper works - it doesn’t register the buttons being pushed on the cabinet.

Reseated all of the connectors, brand new fuses and verified the soldering on the solenoids. Where should I look next? Wanted to add that all flipper and bumper coils are new and match the original board in terms of wiring.

Edit: got this figured out, game is all working now, so disregard.

Has anyone found a way to restore the apron aside from the stickers floating around on eBay? I don’t think I like the lighted apron and I figured someone has figured something out by now. This is one of the last things I need to do on my restore.