Quoted from jdoz2:I don’t get any voltage at the chimes or the coindoor lockout relay. I repinned a few connectors so I’m not sure if I got a wire in a wrong spot or not. The chimes don’t work in self test either.
Does anyone have any suggestions?
Solenoid power to the cabinet (chimes and coin door lockout coil) comes from the J2 connector on the rectifier board specifically the thin green wire at pin 2. Note pin 10 also has a green wire but it's thicker and is a ground wire from the line cord.
Check/replace the pin 2 crimp terminal on that J2 connector.