Open the coin door and push the red diagnostic button. 1st push is the lamps, 2nd the displays, 3rd will fire all the solenoids. Do the non working ones fire?
You're currently viewing posts by Pinsider tomdrum.
Click here to go back to viewing the entire thread.
Open the coin door and push the red diagnostic button. 1st push is the lamps, 2nd the displays, 3rd will fire all the solenoids. Do the non working ones fire?
Lift the playfield and start a game. Manually activate the switch where the ball rests for the solenoid that fires the ball into the shooter lane. Does it fire?
Sorry misread your post after running the solenoid test. Problem most likely the connectors that attach to the boards. Most likely they need re-pinned. See:
https://www.pinwiki.com/wiki/index.php?title=Bally/Stern#Connectors
Quoted from Slickdg:Thanks that would be on the harness to the solenoid board I should be checking ?
Yes
You're currently viewing posts by Pinsider tomdrum.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-strike-and-spares-wont-eject-the-ball-and-bumpers-arent-workin?tu=tomdrum and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.