Quoted from Nick_C:they are slightly lower than should be, .001uf compared to .01uf
10x is significantly lower.
You're currently viewing posts by Pinsider sparky672.
Click here to go back to viewing the entire thread.
Quoted from Nick_C:they are slightly lower than should be, .001uf compared to .01uf
10x is significantly lower.
Quoted from Nick_C:Both C27 and C28 have same reading. Would this be my problem? Should I replace?
If a cap is supposed to be 0.01 uF and it's 10x smaller, I would change it.
That being said, I'm not a Bally/Stern guy... maybe there was a reason for this... were there any service bulletins about changing these caps to 0.001 uF? Are there any recommended upgrades that involve these cap values?
You're currently viewing posts by Pinsider sparky672.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-stern-unable-to-adjust-display-voltage-?tu=sparky672 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.