I'd be interested in a kit.
You're currently viewing posts by Pinsider drewscruis.
Click here to go back to viewing the entire thread.
Quoted from AlanJ:Working on a Bally SDB - Solenoid Driver Board tester:
[quoted image]
It will test:
1. The 15 Momentary Solenoid Driver Circuits
2. The 4 Continuous Solenoid Driver Circuits (Including the Coin Lockout and Flipper Enable Relay)
3. The Two Flipper relay Switch circuits
4. The 5v Regulator Circuit
5. The HV circuit (I'm not sure on this yet, as we clearly don't want a tester board carrying 230v DC, so will experiment with some other ways to test the HV circuit.)
There will be an option to still be able to test, even if the SDB 5v regulator circuit has failed. (By providing 5v supply to the SDB from the tester itself, instead of from the SDB).
Aim is to complete the design, build a prototype board and see how it goes..........
Lmk when this is ready, I've been looking for a stand alone tester for a sdb.
You're currently viewing posts by Pinsider drewscruis.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-stern-lamp-driver-board-tester?tu=drewscruis and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.