I have a Stencil Kit for a Bally Star Trek cabinet
I would like to restore. I would like to know if anyone could walk me through the process of
repainting it. and the correct color of paint to
use. Thanks Appreciate the help

Thanks Atari_Daze and JeffZee
for the Info. Very Helpful.

WoW! Looks Gorgeous. Appreciate you
sharing step by step details. I like the colors
you chose. I wanna use the same colors.
This is my first attempt at painting a cabinet
I hope it turns out decent. i used a sander
and removed all the paint and primered the cab. i hadnt worked on it in months n was in
storage but all the dust settled on the cab and
has a blackish color. would i need to remove
all the primer off or can i just go over it with
more primer? i cant wait to restore Star Trek
I even got a new backglass from Classic playfield reproductions. i have the BG that
was a repro of the prototype backglass
where the crew members are wearing
differnt colored uniforms

PPS-GT-408-35PTL (resized).jpg

Thanks for the Suggestions. I dunno might have to try the light sanding and maybe try a light coat of primer on it. its kinda grayish looking. it was in storage for awhile. i should have wrapped it in plastic. Thats Great you have that BackGlass as well. I bought a nicer used playfield awhile back. not alot of wear on it as the one in it. I can do basic pinball repair but not technical at wiring for playfield. will have to take the better playfield to a electronics shop n have the better parts swapped over. Star Trek is my favorite Tv show growing up. this pinball means alot to me and hope it turns out as beautiful as yours. I have a Williams Flash that I had the playfield completely restored and redone to factory new. and all boards bulletproofed and a very nice backglass for it. but cabinet needs repainting bad. but unable to find a stencil for it.

Woo Hoo! Thanks Again PinDoc . Will be ordering for sure