Hi!
Another thread regarding parts Im not really sure what is called:
I bought a Bally Star Trek, and when assembling the backbox and attempting to put in the bolts through the bottom of backbox and into the cabinet, there was only one of the bolts that actually was fastened. I had a look under the holes in the cabinet, and apparently three of the round metal parts where the bolts are fastened in, has fallen out. I found two in the bottom of the cabinet. These does not have regular screws in them, they have this kinds of nails hammered in.
Any ideas on how to solve this?
I tried hammering in nails in one of the metal parts, and started tightening the screw, but then suddenly it got loose again with the bolt really fastened in it, so that is another hair ripping issue also.. -_-
67673123_2101348039965961_8595590114741059584_n (resized).jpg67729842_1989569554476646_5234480714711302144_n (resized).jpg67965825_2233384043425190_4520867264211189760_n (resized).jpg