Do any of you have ideas on this plug? I have replaced almost everything. Lamp board, aux lamp board, rectifier board, solenoid board. Resoldered all pins new crimped ends and plugs. But still cannot get all of the infinity lamps to light and some play field lights to light. All bulbs checked good bulbs to ground all light. My last resort is a new MPU board. I have resoldered all of those pins And reseated all chips. However the plug in the picture only has a blue wire on one side and not on the other. It does have power from the back glass side however. Any thoughts on my problems?

0B46A06C-C72B-42F4-8CD4-0BA760C39CB5 (resized).jpeg

55DE17D4-6B92-497D-AD55-080E59E3F2C0 (resized).jpeg

591D5640-122B-4419-8D2D-72558A56FB4C (resized).jpeg

Thanks for the info. A new MPU board will show up in two days. I will post my findings.

Ok after replacing the MPU board. I finally found one broken wire in the j1 connector on the MPU board that fixed everything.

7F5EAF95-CECC-4976-AEF2-9A8B9ADFEC43 (resized).jpeg