Finally got my Space Invaders setup. It had been sitting for at least 5 years before i got the game. Game boots and was able to get a game started. The thing preventing me from actually playing a game is that any switch closure on STROBE 0 tilts the game. I am refreshing the driver board to install a fresh 5V cap and do the ground mods and tie the two 5V lines together on the board. Will be checking for any shorted wires on the strobe 0, any shorted diodes, and check to see if any have caps and if any are bad. Hopefully it won't be too hard to isolate and track down.

I've never playing this game before and looking forward to it.

20210912_151631 (resized).jpg