Skateball
Bally, 1980You're currently viewing posts by Pinsider BigAl56.
Click here to go back to viewing the entire thread.
The common 43v wire to all the playfield solenoids is yellow (30). It comes off of the playfield fuse by the flippers. The unfused side is Brown (60) and originates from the J1 connector on the rectifier board. Only the flippers are unfused. The remaining coils on the playfield should be fused 43v and the yellow bus wire should attach to the banded side of the coil diode.
You're currently viewing posts by Pinsider BigAl56.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-skateball-under-playfield-pics-needed-?tu=BigAl56 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Palatine, IL