The 2 right flippers will stop working after one or 2 flips. Everything else is fine.
Any help is welcome, thanks
The 2 right flippers will stop working after one or 2 flips. Everything else is fine.
Any help is welcome, thanks
You may have cold solder joints on the flipper relay that is on the solenoid driver board. Soldering these required.
Also check your end of stroke switches on the flipper assemblies. They need to be closed and then open completely with the flipper bat up.
I would check the switch for the right flipper button in the cabinet, and then the wiring that goes to the lower right flipper coil lugs/EOS switch. The power daisy chains from the lower right to the upper right. The relay is probably fine if the left hand flippers continue to work.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-skateball-flipper-issue?hl=stf_dnx and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.