(Topic ID: 211560)

bally sheba 1964 troubles

By gilles89

3 years ago


Topic Heartbeat

Topic Stats

  • 15 posts
  • 5 Pinsiders participating
  • Latest reply 3 years ago by gilles89
  • No one calls this topic a favorite

You

Linked Games

#1 3 years ago

hi
i work on my bally sheba to restore this old game.
i've cleaning safety all parts in the game but i have to troubles i can't solve :
the "1000 points" relay never reset, even i can follow the link from reels to final reset relay without break.
i try to see "100 points" relay but i see nothing wrong on it.
when you play a game on player 1 for exemple,and too on player 2, the 1000 points goes to 1 good when you win 999 points.
other, if you win "50 points" everywhere on the playfield, you get always 40 points and never 50.
and impossible find this plan somewere thank
gilles

#2 3 years ago

Hard to tell without the schematic, but you can hopefully find some info here: http://www.pinrepair.com/em/index1

Did you try PBR for the schematic? http://www.pbresource.com/

#3 3 years ago

thank a lot for the answer curriedog, i'll try it.
not a trouble for me to buy schematic near steve young, but very hard from france: need to mail to steeve, after make a bank transfert
and finaly receive plan by post, i suppose.
so i'll try it.

#5 3 years ago

hi rolf
great thank for informations
i've just send my ask near them and i'm in attent for an email to know how can i pay the plan.
i hope with this i could finish my game and find there are exactly the troubles

#6 3 years ago

hi everybody
i just receive copy of schematic from jukeboxpinball but very bad story!
the schematic is very smal and bad, it's impossible to read it for me.
so i try to contact pinball ressource for buying elsewhere but impossible to send a mail to pinball ressource, the link never work.
some body could'nt help me with it ?
i'm surching for bally sheba and bally surfers for schematics, and manual too for surfers.
even in pdf format
i could see that others members have these games on the forum.
thank
gilles

#8 3 years ago

hi
thank curiedog
i finaly could bought games plans near pinball ressource.
i'm waiting for them.
gilles

1 week later
#9 3 years ago

hi
i've got the schematic near pbr but nothing to do to find where are the troubles: 1000 scores reels who don't reset
and game always give 40 points for 50.
there is a 50 points relay and it always seems work fine, but even four times
somebody could confirm the right position for the two pairs on contacts on player 1000 ? (it's a two players)
thank
gilles

#10 3 years ago

in fact, in don't understand how this game proceed to reset these 1000 (and latest) scores reels
gilles

#11 3 years ago

Can you please explain what you mean by "1000 points relay never reset"?

#12 3 years ago
Quoted from gilles89:

i've got the schematic

I'd need to see a high quality scan. Do you have Staples or Kinkos near you?

#13 3 years ago

hi Mrbally
if you play a party, at end, then you retry to play once, nothing happened :
one, ten , hundred reset cool, but 1000 is never "called", and motor work endlessely
if you have just under 1000, for exemple 561, you can replay normaly again and again.

hi HowardR
i can just take a numeric part on the schematic.
i try to do this today
gilles

#14 3 years ago

hi HowarD
i tryed but the copy i have near me is to bad to be pictured and my phone too..
gilles

2 weeks later
#15 3 years ago

hi every body
finally i find the trouble: it was'nt the rignt board in the game !!
i find another and now it work perfect
itwa "a three reels board, not a four board.
thank everybody who answered me.
gilles

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside