The Bally Rocket III I bought in Indiana needed some work. So I did the needful and got it done.
Before:
Machine had lots of hacks and was filthy dirty. Old rubbers. Stuck relays. It had 3 inch flippers instead of 2 inch. The zipper flipper latch was replaced with one for 3 inch flippers.
After:
Back to factory condition.
All plastics, posts and metal cleaned.
White rubber rings added.
Playfield cleaned with ME & Simple Green.
Tough sections cleaned with Me & alcohol.
Two coats of carnuba wax.
New 2 inch flipper bats installed.
Correct zipper flipper latch added.
Relays cleaned and adjusted.
More pictures to come.
Marcus