I have just imported 2 Rectifier Boards to the UK (240Vac)
1 Board came from the USA (115Vac) (top pic)
1 Board came from Europe (220Vac) (2nd pic)
The Bally schematics shows using different Varistors for the incoming Vac line EU/UK or USA but says nothing at all about the Varistor on the Rectifier board?
And it looks like the Varistors from each board are basically the same voltage... see pics. I was expecting to see the EU board with a higher rated Varistor..??
So my query is: Does VR1 on the board need to change to a UK based voltage i.e. a 270Vac Varistor? or do I just leave the ones on there as the schematics don't seem to care?
WP_20200809_002 (resized).jpgWP_20200809_004 (resized).jpg