Playboy
Bally, 1978You're currently viewing posts by Pinsider phishrace.
Click here to go back to viewing the entire thread.
Quoted from GPS:I have checked the coil out if the circuit and it is good showing about 5 ohms.
That's about half what it should be. If you don't have a manual, you can download one at the link below.
Knocker coil is a 26-1200, which is about 10.8 ohms.
https://flippers.com/coil-resistance.html
Get the right coil before you do anything else. Likely another problem elsewhere, but start with the right coil (or double check part number/ reading on existing coil).
You're currently viewing posts by Pinsider phishrace.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-pb-knocker-stuck-on?tu=phishrace and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Corbin, KY
Coffs Harbour, NS