looking at your pic they are still wired incorrectly, but are the diodes soldered in the correct orientation?

those eos and upper flipper contacts look like they need replacing also, IMO only.

are you okay with reading schematics, or is that why you asked for pics?

do you know what the eos switch is/does and what lugs they are wired to?

the first set of contacts are normally closed, the End Of Stroke switch EOS (must be a very good connection with zero ohms resistance) this switch goes across the fine winding creating a short until they are opened up upon the energising of the coil.

the second set of contacts are normally open and when closed work your upper flipper.

my attached pic isn't exactly what you are after, but it's the basic layout, the rest is the addition of the second set of contacts and the correct wiring of the power and flipper to the outer lugs.

FC (resized).JPG