I picked up an NBA Fastbreak locally and because of my addiction to The Blazers and the NBA I figured finally take a crack at a 90s pin restoration. Normally I stick with my System 1's but I am excited to tackle it.20141005_154727-799.jpg20141005_154627-330.jpg20141005_154545-846.jpg20141005_154530-586.jpg20141005_154517-207.jpg
I am down to the playfield now, leaving as much installed as I can. Ordered from 4 different Pinball companies, almost have the parts hunt done...20141012_161724-467.jpg20141006_184640-436.jpg
I am missing a part or two... The play field "loop diverter" on the middle left of the play field is missing, re-building the back box plastics and making an order from Pinbits for those.

The latest playfield shot, have to find that "loop diverted" under the right ramp be for I re-assemble.
Any thoughts where? Marco is out of stock sadly...
20141016_173536.jpg

Pretty sure that is the hoop diverter from the left upper ramp. I need the loop diverter underneath the right ramp... Next to Gary payton!

Thanks for the tip! Pinballspareparts has the diverter! I do have the defender plastic, found it in the bottom of the cabinet. Back box plastics which were destroyed I found at pinbits.

Where does this go? Im stupid.20141025_233950.jpg

Very helpful! Im mad at myself for not remembering this piece!

Thanks again for the playfield plastic help. I have been dry-fitting the whole thing as I wait for an Australian parts order. Ordered the "loop diverter", need that before ramp assembly.20141025_234003.jpg20141025_233957.jpg Just for fun I uploaded a close shot of where I "lit it on fire".20141025_234016-453.jpg

I don't think I will make my deadline before the season starts... but im close, so far nothing needed in parts that can't be found. I put the decals on the left ramp today and the upper corner "blue star" decal was very faded.... sad.20141027_201032.jpg

The ramp as a whole. The new ramp is amazing and only 2 decals were visibly faded. "Rebound" decal was light... these were included with the new ramp purchase.

20141027_201257.jpg

And the back box... ordered and replaced plastic stand offs for the ball guides. Waiting for the most often broken upper left curve...

20141027_201833.jpg

Diverter installed! Thanks for all the help with this rebuild!

20141114_175258.jpg

20141114_175246.jpg