Does anyone make water slide decals for the pop bumpers? Also any any Pacman stickers available for the yellow standing targets?
You're currently viewing posts by Pinsider Antennaejim.
Click here to go back to viewing the entire thread.
Does anyone make water slide decals for the pop bumpers? Also any any Pacman stickers available for the yellow standing targets?
Hello all! I just blew out fuse 1 on the rectifier board and all of my lights ad the solenoid expander no longer work but everything else sees to play fine. Solenoids fire and score points during gameplay currently all switches work and sound is fine. Just have no lighting on the playfield at all! Anyone know why this could have happened? 20a fuse. I dont see anything shorting together under the playfield in any of the light circuits in the gi or any any of the lighting sockets under the playfield?
Quoted from Boise_D:Anyone know how I might troubleshoot a single yellow light out on the maze? I've swapped bulbs before, but this time it's not the bulb. I've also reflowed solder to just that lamp, but still nothing. I tried to tone it over to the connectors, but they all seem to tone to every pin, which I don't understand. Any advice appreciated, or I'll end up buying that sweet LED maze board.
In the mr mrs Pacman manual and schematics there is a layout of the pac maze and each color and position are given a number and assigned a transistor on your lighting board. I just repaired my pacmaze and I had to replace a couple transistors and it works perfectly now!
Has anyone on here put led displays in as a complete set? I have a set I just swapped over from the plasma displays. The new led display work perfectly fine I tested them all in my centaur 1 machine. When I put them in my mr mrs Pac, I’m not getting a millions place number on the 7 digit displays during game play or in test mode. I can put the plasma back in and the plasma work fine. Any ideas? Should work the same as centaur plug and play I thought it’s a head scratcher.
BBFACFCC-72B6-4B52-9430-8126007059A7 (resized).jpegQuoted from Hop-Pac:https://pinside.com/pinball/forum/topic/pinscore-displays-help
I had a problem getting mine to work too. This worked for me
Post #49
Thank you, removing The wire at the #11 pin on each of the 7 digit displays harness did the trick! The wire can always be put back in the harness if I decide to go back to plasma displays this works great!
You're currently viewing posts by Pinsider Antennaejim.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-mr-and-mrs-pacman-wants-al-to-play?tu=Antennaejim and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.