Bally motor and gear charts

3
Topic is favorited by 3 Pinsiders.

By DennisDodel

1 week ago


Stats

  • Started 1 week ago
  • 13 posts
  • 7 Pinsiders participating
  • Latest reply 1 week ago by BingoButch

Find posts in this topic

Find posts in this topic match certain words or written by a specific Pinsider. Or both!


Topic Gallery

img552 (resized).jpg
img550 (resized).jpg
img549 (resized).jpg


Games linked to topic

Link this topic to the game(s) discussed in it.



    #1 12 days ago

    > These charts were put together by my good friend and mentor "Bingo Bob" Uttendorfer. 80 years young!
    > If you have any additions or corrections, please feel free to add them to the charts.
    > Many of the motors and gears are available from The Pinball Resource. Please note that the Bally motors and gears were also used on many other Bally products.

    img549 (resized).jpg

    img550 (resized).jpg

    img552 (resized).jpg

    #2 12 days ago

    This is a real treasure trove of information! Thank you for posting.

    #3 12 days ago

    Any idea if the score motor on skill roll is shared with any of these games?

    #4 12 days ago
    Quoted from RustyLizard:

    Any idea if the score motor on skill roll is shared with any of these games?

    Sorry. No. The sequence motor on Skill Roll is E-119-154. Try Steve at Pinball Resource.

    #5 12 days ago
    Quoted from bingopodcast:

    This is a real treasure trove of information! Thank you for posting.

    And thanks to you Nick for your input.

    #6 11 days ago

    Thanks Dennis, this is fantastic stuff. Good to see what's interchangeable when grabbing parts off of a donor machine.

    #7 11 days ago

    Thanks Dennis. Valuable info.

    #8 10 days ago

    I will pass the compliments on to Bob.

    #9 10 days ago

    Dennis,

    My father told me to tell you that your the man.

    Mike from Bingo Butch

    #10 10 days ago

    pinball resource is selling the rotors and first reduction gears individually? The first reduction gear is gear 4 in the chart, and is usually plastic or bakelite.

    any idea what the pricing is?

    the rotor and the first gear it mates to are usually the only worn parts. If you get the gearbox apart without shredding the gasket, those are all you need to make a like-new motor.

    #11 10 days ago

    I sent Steve about 500 lbs. of motor parts last year but he has not had time to unbox everything. Short on rotors I think but most every gear is available.
    No idea on pricing but Steve is always reasonable.

    #12 10 days ago
    Quoted from BingoButch:

    Dennis,
    My father told me to tell you that your the man.
    Mike from Bingo Butch

    Thanks Mike. Hurry up and get that Serenade! I'm itching to see the serial number and hoping there is paperwork inside.

    #13 10 days ago

    Where to call after the holidays.. When we set it up we are def. gonna be stopping by your place.

    Promoted items from the Pinside Marketplace
    $ 35.99
    Lighting - Interactive
    Lee's Parts
    $ 5.00
    Cabinet - Decals
    Siegecraft Electronics
    $ 66.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    $ 15.00
    Cabinet - Decals
    ModFather Pinball Mods
    From: $ 15.00
    Playfield - Decals
    Flashinstinct
    $ 7.00
    Various Other Swag
    Double Danger Pinball
    $ 989.00
    Pinball Machine
    Mircoplayfields
    $ 40.00
    Playfield - Toys/Add-ons
    Just 3D Mods
    $ 9.95
    Playfield - Toys/Add-ons
    ULEKstore
    $ 44.99
    Lighting - Interactive
    Lee's Parts
    $ 9.95
    $ 224.99
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    $ 6.00
    From: $ 23.00
    Playfield - Plastics
    ModFather Pinball Mods
    From: $ 42.00
    Cabinet - Shooter Rods
    ModFather Pinball Mods
    $ 49.95
    From: $ 20.00
    Playfield - Toys/Add-ons
    ModFather Pinball Mods
    From: $ 42.00
    Cabinet - Shooter Rods
    ModFather Pinball Mods
    $ 29.99
    Lighting - Interactive
    Lee's Parts
    $ 6,400.00
    Pinball Machine
    Flip N Out Pinball
    $ 199.99

    Reply

    Wanna join the discussion? Sign up for a Pinside account, or log in if you already have an account.