There seems to be everything needed to make a Kiss from scratch except the wide upper gates. Anyone know where I can get a pair, one left and one right? Or as VID1900 pointed out in another post, they can be reversed by careful dis- and re-assembly.

It seems you can get plastics, playfields and backglasses from CPR, cabinet stencils from the pinball pimp, wiring harness here: https://pinside.com/pinball/forum/topic/new-wire-and-harnesses/page/5 , apron decals on ebay, and the rest are common parts to other machines. Wood board behind the backglass might be another creative challenge.

I put up an add looking for the gates and contacted everyone forum members suggested, etc. I was too cheap to shell out the $240 for a pair when they came up on EBAY. Will Marco or someone else remake these?

Thanks, Jay

Kiss gate (resized).JPG

Bally part numbers A-1475-15 (left) and A-1475-14 (right). Thanks, Jay