KISS
Bally, 1979You're currently viewing posts by Pinsider djblouw.
Click here to go back to viewing the entire thread.
Start by checking to see if you have voltage at the light socket. Go into lamp test, and check with a multimeter.
If no voltage, check the connector at the lamp board. J1 pin 11 is top/bottom bumper. J3 pin 20 is left/right bumper.
Also, double check that the lamp braid stapled to the pf is connected properly.
For drops, check the spring first.
You're currently viewing posts by Pinsider djblouw.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-kiss-please-help-me-help-someone-else?tu=djblouw and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
