On the skill hole light problem. The brown-white wire that feeds the light connects to a normally open switch on the top reb’d relay. Inspect wire and switch connections for shorts to other blades or connections.
You're currently viewing posts by Pinsider pinballdaveh.
Click here to go back to viewing the entire thread.
On the skill hole light problem. The brown-white wire that feeds the light connects to a normally open switch on the top reb’d relay. Inspect wire and switch connections for shorts to other blades or connections.
Those pics show that wrong connections were probably made. The schematic shows a chart that assigns a number to a color. These wire numbers can be found on the jones plug charts. Many wire color duplicates are found on the charts. Tracking down to where these duplicated wires originated was probably not done, and cross wiring happened.
You're currently viewing posts by Pinsider pinballdaveh.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-joust-problem?tu=pinballdaveh and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.